Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Description
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Applications
Properties
How to use
REVETON 5000 is applied on all types of supports, concrete, cement mortar, plaster (prior primer) etc ... The plaster must be aristado, masestreado and fine fratasado.
The surface must have a clean surface of dust and grease.
A primer coat will be given as a primer (for example: LIQUID SIMILAR), diluted to 30% of the same color as that chosen for the thin layer with REVETON 5000 to mask possible glazing.
From the 4-6 hours the second layer with the REVETON 5000 will be given by conventional trowel, in a single pass, uniformly regulating the thickness.
To finish the finish, once the product has been extended into a uniform layer, the finishing will be done by a trowel of wood or plastic with the circular movement and the striped finish in movement from top to bottom.
For the treatment of large surfaces and to avoid the joints of work, it is advisable to dismantle it in panels of about 15m² / l, which will be done with adhesive tape.
The yield: 2.5 and 2.7 kg / m² according to support
Tools:
Manual application: Pattern roller, honeycomb roller, stainless steel trowel and fratas
Cleanliness: Abundant water
Drying: approx. 6-8 hours.
Consolidation: 3 weeks
Average particle size: 1.6 mm
Maximum particle size: 1,8 mm
Water-based fixative sealer, with high penetrating performance. For indoor and outdoor use. To prime surfaces before painting them. Dilute 1 part fixative with 3-4 water.
Especially suitable for:
Unsound or highly porous walls and ceilings made out of plaster, concrete or brick.
To seal or reinforce old paints before recoating.
Smooth coating paint for exterior use, based on acrylic copolymers in emulsion. Intermixable colours. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable.
Acrylic sealer to the water,specially penetrating to fix parameters(walls,floors,etc.) in external and in interiors.Great penetration and application easiness.On the fixer to the water all the paintings can be applied to the water(plastic paintings,linings,waterproofing,etc... etc.)
Acrylic coating in thick, waterproof and decorative layer of medium granular finish. Excellent protection of the supports in the open. Resistance to atmospheric dirt. High permeability to water vapor. Great aesthetic possibilities and luminosity
Rough stone coating, highly resistant to alkalinity and atmospheric agents. Protection and decoration of façades in general. Textured coating.High resistance to weathering.. Waterproof. Breathable. It contains antimould preservative. For protecting and waterproofing single-coat mortars. It masks the surface irregularities.
COTEFILM NG is an ultra elastic smooth acrylic coating specially formulated to prevent water seepage from outside. Anti-Fracture (able to seal hairline cracks up to 2 mm). Self-cleaning. Permeable to water vapour, allowing the support to breathe. Impermeable to rainwater.
Acrylic coating in thick, waterproof and decorative layer of medium granular finish. Excellent protection of the supports in the open. Resistance to atmospheric dirt. High permeability to water vapor. Great aesthetic possibilities and luminosity
Coating for siloxane-resin based façades that stand up very well to alkalinity and atmospheric agents.. Fully breathable. Completely repaintable. Complies with DIN 18558. ECOLOGICAL. Repels dirt.
Product for removing and cleaning saltpetre and mould growth on masonry and brickwork surfaces.
SMOOTH ACRYLIC COATING FOR PROTECTION AND DECORATION OF FAÇADES
Ideal for application on walls and ceilings, and especially for home bathrooms and kitchens
With anti-mold preservative and a great resistance to the weather in addition to being resistant to friction and wear (washable)
Hormipres AQ is a finishing varnish for concrete and printed concrete floors based on water-based acrylic resin. With a whitish appearance that forms a transparent and shiny film when dry. Use in outdoor and indoor pavements.
Waterproofing super-elastic acrylic coating based on photorefractive pure acrylic copolymers in aqueous dispersion, selected extenders and stable pigments. Especially indicated for the protection and decoration of construction surfaces where cracks up to 1 mm exist or are foreseen
High quality silicate paint, matte finish, especially indicated for the protection and embellishment of facades. It is especially suitable for the protection of mineral surfaces: lime and / or cement plasters, gypsum, brick, concrete, stone, fiber cement, etc., both in new and restorative works such as houses, schools, hospitals, public buildings, monuments.
High quality silicate paint, matte finish, especially indicated for the protection and embellishment of facades. It is especially suitable for the protection of mineral surfaces: lime and / or cement plasters, gypsum, brick, concrete, stone, fiber cement, etc., both in new and restorative works such as houses, schools, hospitals, public buildings, monuments.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Pintamax Facades Coating is a paint for exterior and interior with protection of mold and verdin. The quality if the pigments and materials that are used to give color and obtain a long durability in the surfaces to paint, provide a guarantee for 5 years, in its low degradation and permanent quality.
Chat with us on WhatsApp
Español
Français
