• On sale!
  • -30%
    IMPERTRESA ELÁSTICO MATE REVETON. Revestimiento acrilico superelastico antifisuras de hasta 1mm

MATE REVETON ELASTIC IMPERTRESS. Super-acrylic anti-cracking acrylic coating up to 1mm

€84.89
€59.43 Save 30%
Tax included

Waterproofing super-elastic acrylic coating based on photorefractive pure acrylic copolymers in aqueous dispersion, selected extenders and stable pigments. Especially indicated for the protection and decoration of construction surfaces where cracks up to 1 mm exist or are foreseen

size : 4L.
Color : White
Quantity
Add to wishlist

Description

Waterproofing and anti-cracking elastic paint, based on pure photoresistable acrylic copolymers, in aqueous dispersion, selected extenders and stable pigments. Especially indicated for the protection and decoration of construction surfaces where cracks up to 1 mm exist or are foreseen.

Applications

  • Outside: Facades and other facades. Patios of lights.
  • Inside: Public places.

Properties

  • Waterproof to rainwater and washable.
  • Fracture bridging capability up to 1 mm between lips.
  • It absorbs the movements of the living fissures.
  • Allows the transpiration of the support.
  • Anti-mold effect.
  • Easy application, no splashing or dripping.
  • Good adhesion on the usual supports in the construction.
  • No surface tack: does not retain dirt.

How to use

  • PREPARING THE SUPPORT:

The surface to be painted should be consistent, dry and clean, and not have dust, grease, old paint residue, poor adhesion, efflorescence, etc.
In addition the surface must have pore and not be waterproofed. On difficult supports can be used as an anchorage bridge UNIVERSAL PRINTING.
It is already ready-to-use, in the form of a slightly thixotropic product. Before applying, remove the product.

On new surfaces, a sealant such as TEXLITE or COTEFILM PRINTING must be previously applied.

  • APPLICATION OF THE PRODUCT:

Apply the first coat of IMPERTRESA ELÁ STICO Reduced with 15% - 20% water. Once dry apply the second coat of IMPERTRESA ELÁ STICO pure.
Do not apply ELASTIC IMPERTRESS if rain is anticipated before two hours after application. Do not apply at ambient temperature below 5 ° C, or on very hot surface exposed to the soil with strong wind.
On old surfaces remove paint in poor condition until well supported and proceed normally.
In the presence of mold and microorganisms, treat the substrate thoroughly.

The approximate yield of product is 3 m2 / l in two layers.

Tools: IMPERTRESA ELASTICO is applied with roller, brush or airless spray.

The tools are cleaned with copious water immediately after use.

Drying time:

  • To the touch: 2 hours
  • Repainting: 6 hours
  • Total: 24 hours

Finish: Plain Matte

Appearance: Thixotropic paste.

New

You might also like

Nature 70 Padded, façades and outdor surfaces. Maximum covering power and 70 mm. diameter for maximum performance and minimum splash.

  • Maximum covering power.
  • 70 mm. diameter for maximum performance and minimum splash.
  • Manufactured with internal polyurethane foam for better adaptation to irregular surfaces.
  • 100% Extra long Polyamide 20 mm.

Recommended use: Façades and outdor surfaces

Bicolor 60 Padded, façades and outdor surfaces. Maximum covering power and 60 mm. diameter for maximum performance.

  • Maximum covering power.
  • 60 mm. diameter for maximum performance.
  • Manufactured with internal polyurethane foam for berrer adaptation to irregular surfaces.
  • 100% Extra long Polyamide 20 mm.

Recommended use: Façades and outdoor surfaces

16 other products in the same category:

Elastic and waterproof coating for roof treatment that facilitates the reflection of sunlight and reduces the heat transmission inside the building.
Thermo-reflective insulation, facilitates the reflection of sunlight and reduces the heat transmission inside the building, achieving greater thermal comfort and a considerable energy saving in air conditioning.

High quality silicate paint, matte finish, especially indicated for the protection and embellishment of facades. It is especially suitable for the protection of mineral surfaces: lime and / or cement plasters, gypsum, brick, concrete, stone, fiber cement, etc., both in new and restorative works such as houses, schools, hospitals, public buildings, monuments.

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.