• -40%

REVSUN TEC PLUS THERMAL FLOOR COVERING Decreases Heat

€270.25
€162.15 Save 40%
Tax included

Elastic and waterproof coating for roof treatment that facilitates the reflection of sunlight and reduces the heat transmission inside the building.
Thermo-reflective insulation, facilitates the reflection of sunlight and reduces the heat transmission inside the building, achieving greater thermal comfort and a considerable energy saving in air conditioning.

size : 15L.
Color : White
Quantity
Add to wishlist

Description

Elastic and waterproof coating for roof treatment that facilitates the reflection of sunlight and reduces the heat transmission inside the building. Waterproof cover coating treatment based on an aqueous dispersion of acrylic copolymers.

As a thermoregulating insulation, Revsun Tecplus facilitates the reflection of sunlight and reduces the heat transfer inside the building, thus achieving greater thermal comfort and a considerable energy saving in air conditioning.

As a waterproofing system, Revsun Tec Plus meets the basic requirements established in the CTE, having the DITE certification according to the European Technical Guide ETAG005 with an estimated life of up to 10 years.

Applications

  • Thermo-reflective insulation of roofs (reduction of heat transmission inside the building).
  • Waterproofing of roofs forming a membrane "in situ" by means of a TEXNÓN 300 fiberglass mesh.

Properties

  • Total waterproofing to rainwater.
  • Special reflective pigments that facilitate the reflection of sunlight.
  • Additives that decrease tacking and consequently the tendency to accumulate dirt and impurities.
  • Stepping when it has reticulated.
  • Easy application.
  • Adaptability to all surface shapes.
  • High elasticity at low temperature.
  • Resistance to U.V. (Test 500h; MELL 1294 INCE).
  • Chemical resistance to the alkalinity of cement. "

How to use: (See Technical Data Sheet)

Performance:

  • As a thermoregulatory insulation system: 1.4 l / m² to obtain a minimum membrane thickness of 1 mm in two layers.
  • As a waterproofing system according to DITE: 2 l / m² / l fitted with fiberglass for waterproofing systems (300 gr / m², such as "TEXNÓN 300") is recommended to obtain a minimum membrane thickness of 1.5 mm in two layers

Tools: Brush, Roller or Airless Pistol

Cleaning: Water before drying, but it will be necessary Solvent

Technical data:

  • Solar reflection index: 70%
  • Thermal Emit: 0.91

Drying time:

  • To the touch: 3 hours
  • Total: 24-48 hours

Elongation at break: 270%

Finish: Satin-Mate

New

You might also like

Nature 70 Padded, façades and outdor surfaces. Maximum covering power and 70 mm. diameter for maximum performance and minimum splash.

  • Maximum covering power.
  • 70 mm. diameter for maximum performance and minimum splash.
  • Manufactured with internal polyurethane foam for better adaptation to irregular surfaces.
  • 100% Extra long Polyamide 20 mm.

Recommended use: Façades and outdor surfaces

Bicolor 60 Padded, façades and outdor surfaces. Maximum covering power and 60 mm. diameter for maximum performance.

  • Maximum covering power.
  • 60 mm. diameter for maximum performance.
  • Manufactured with internal polyurethane foam for berrer adaptation to irregular surfaces.
  • 100% Extra long Polyamide 20 mm.

Recommended use: Façades and outdoor surfaces

1 other product in the same category:

Elastic and waterproof coating for roof treatment that facilitates the reflection of sunlight and reduces the heat transmission inside the building.
Thermo-reflective insulation, facilitates the reflection of sunlight and reduces the heat transmission inside the building, achieving greater thermal comfort and a considerable energy saving in air conditioning.

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.