Description
Elastic and waterproof coating for roof treatment that facilitates the reflection of sunlight and reduces the heat transmission inside the building. Waterproof cover coating treatment based on an aqueous dispersion of acrylic copolymers.
As a thermoregulating insulation, Revsun Tecplus facilitates the reflection of sunlight and reduces the heat transfer inside the building, thus achieving greater thermal comfort and a considerable energy saving in air conditioning.
As a waterproofing system, Revsun Tec Plus meets the basic requirements established in the CTE, having the DITE certification according to the European Technical Guide ETAG005 with an estimated life of up to 10 years.
Applications
- Thermo-reflective insulation of roofs (reduction of heat transmission inside the building).
- Waterproofing of roofs forming a membrane "in situ" by means of a TEXNÓN 300 fiberglass mesh.
Properties
- Total waterproofing to rainwater.
- Special reflective pigments that facilitate the reflection of sunlight.
- Additives that decrease tacking and consequently the tendency to accumulate dirt and impurities.
- Stepping when it has reticulated.
- Easy application.
- Adaptability to all surface shapes.
- High elasticity at low temperature.
- Resistance to U.V. (Test 500h; MELL 1294 INCE).
- Chemical resistance to the alkalinity of cement. "
How to use: (See Technical Data Sheet)
Performance:
- As a thermoregulatory insulation system: 1.4 l / m² to obtain a minimum membrane thickness of 1 mm in two layers.
- As a waterproofing system according to DITE: 2 l / m² / l fitted with fiberglass for waterproofing systems (300 gr / m², such as "TEXNÓN 300") is recommended to obtain a minimum membrane thickness of 1.5 mm in two layers
Tools: Brush, Roller or Airless Pistol
Cleaning: Water before drying, but it will be necessary Solvent
Technical data:
- Solar reflection index: 70%
- Thermal Emit: 0.91
Drying time:
- To the touch: 3 hours
- Total: 24-48 hours
Elongation at break: 270%
Finish: Satin-Mate