Waterproofing super-elastic acrylic coating based on photorefractive pure acrylic copolymers in aqueous dispersion, selected extenders and stable pigments. Especially indicated for the protection and decoration of construction surfaces where cracks up to 1 mm exist or are foreseen
Description
Waterproofing and anti-cracking elastic paint, based on pure photoresistable acrylic copolymers, in aqueous dispersion, selected extenders and stable pigments. Especially indicated for the protection and decoration of construction surfaces where cracks up to 1 mm exist or are foreseen.
Applications
Properties
How to use
The surface to be painted should be consistent, dry and clean, and not have dust, grease, old paint residue, poor adhesion, efflorescence, etc.
In addition the surface must have pore and not be waterproofed. On difficult supports can be used as an anchorage bridge UNIVERSAL PRINTING.
It is already ready-to-use, in the form of a slightly thixotropic product. Before applying, remove the product.
On new surfaces, a sealant such as TEXLITE or COTEFILM PRINTING must be previously applied.
Apply the first coat of IMPERTRESA ELÁ STICO Reduced with 15% - 20% water. Once dry apply the second coat of IMPERTRESA ELÁ STICO pure.
Do not apply ELASTIC IMPERTRESS if rain is anticipated before two hours after application. Do not apply at ambient temperature below 5 ° C, or on very hot surface exposed to the soil with strong wind.
On old surfaces remove paint in poor condition until well supported and proceed normally.
In the presence of mold and microorganisms, treat the substrate thoroughly.
The approximate yield of product is 3 m2 / l in two layers.
Tools: IMPERTRESA ELASTICO is applied with roller, brush or airless spray.
The tools are cleaned with copious water immediately after use.
Drying time:
Finish: Plain Matte
Appearance: Thixotropic paste.
COTEFILM NG is an ultra elastic smooth acrylic coating specially formulated to prevent water seepage from outside. Anti-Fracture (able to seal hairline cracks up to 2 mm). Self-cleaning. Permeable to water vapour, allowing the support to breathe. Impermeable to rainwater.
Acrylic sealer to the water,specially penetrating to fix parameters(walls,floors,etc.) in external and in interiors.Great penetration and application easiness.On the fixer to the water all the paintings can be applied to the water(plastic paintings,linings,waterproofing,etc... etc.)
Smooth solvent-based acrylic coating for pliolite-resin based façades. Exceptional adhesion on all types of construction materials, including wet substrates or in very difficult conditions. Waterproof and completely breathable.
Coating for siloxane-resin based façades that stand up very well to alkalinity and atmospheric agents.. Fully breathable. Completely repaintable. Complies with DIN 18558. ECOLOGICAL. Repels dirt.
Superelastic and waterproof coating formulated with pure acrylic resins, photoreticants in aqueous phase and pigments of complete fastness to the light and the weather. Self-cleaning.
Semitriple Thickness Flat PRO Brush - Serie 4, ideal for all kind of applications. Plastic handle and cooper ferrule.
Recommended use: Ideal for all kind of applications
Pressed Round Brush, for acrylic latex paint. Economical professional brush and wooden handle.
Recommended use: For acrylic latex paint
Nature 70 Padded, façades and outdor surfaces. Maximum covering power and 70 mm. diameter for maximum performance and minimum splash.
Recommended use: Façades and outdor surfaces
Bicolor 60 Padded, façades and outdor surfaces. Maximum covering power and 60 mm. diameter for maximum performance.
Recommended use: Façades and outdoor surfaces
Smooth solvent-based acrylic coating for pliolite-resin based façades. Exceptional adhesion on all types of construction materials, including wet substrates or in very difficult conditions. Waterproof and completely breathable.
Smooth finish coating. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable
Waterproofing and decorative coating formulated from acrylic copolymers in aqueous solution, inorganic pigments and selected fillers, for exteriors and interiors.
Revestimiento de gama alta 100% acrílico con máximo poder impermeabilizante, cubrición, adherencia y durabilidad. Mate sedoso
Bricogar facades is a paint coating gives the surface to be painted, finished to very good durability. Due to its composition and balance formula, we obtain a breathable surface and a delay in aging facades.
SMOOTH ACRYLIC COATING FOR PROTECTION AND DECORATION OF FAÇADES
Ideal for application on walls and ceilings, and especially for home bathrooms and kitchens
With anti-mold preservative and a great resistance to the weather in addition to being resistant to friction and wear (washable)
Smooth coating paint for exterior use, based on acrylic copolymers in emulsion. Intermixable colours. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Coating for siloxane-resin based façades that stand up very well to alkalinity and atmospheric agents.. Fully breathable. Completely repaintable. Complies with DIN 18558. ECOLOGICAL. Repels dirt.
Chat with us on WhatsApp
Español
Français
