COTEFILM NG IS AN ULTRA ELASTIC SMOOTH ACRYLIC COATING. ANTI-FRACTURE. SELF-CLEANING REVETON
€118.57
€83.00
Save 30%
Tax included
COTEFILM NG is an ultra elastic smooth acrylic coating specially formulated to prevent water seepage from outside. Anti-Fracture (able to seal hairline cracks up to 2 mm). Self-cleaning. Permeable to water vapour, allowing the support to breathe. Impermeable to rainwater.
Superelastic and waterproof coating formulated with pure acrylic resins, photoreticants in aqueous phase and pigments of complete fastness to the light and the weather. Matte stucco finish.
Applications
Protection and decoration of surfaces in façades and usual supports in exterior construction such as: concrete, mortar, brick, stone, etc.
Waterproofing of external supports that require a high level of elasticity due to cracks or to be expected to have them, even up to 2 mm between the lips of the same.
Properties
Superelastic.
Waterproof to rainwater. NFT30701
Breathable. According to ISO 7783-1 and -2 Sd350 μmH2O = 0,26.
Very resistant to the weather and microorganisms.
Self-cleaning.
Product with CE marking as protector of concrete surfaces according to UNE-EN1504-2: 2005.
How to use
PREPARATION OF THE SUPPORT: The surface to be painted should be clean, healthy, dry, without efflorescence or mold. The small existing cracks will be filled with undiluted COTEFILM NG FLAT, preferably by a brush and ensuring that the crack is well filled and covered. Fissures greater than 2 mm. Shall be sanitized and filled with exterior or mortar filling paste.
APPLICATION OF THE PRODUCT: A primer should always be given first (recommended: COTEFILM AQUA PRIMER or COTEFILM PRIMER TO SOLVENT), applied by brush, roller or gun. (The use of COTEFILM AQUATIC PRIMER in rehabilitation and on plastic paints is recommended. For non-absorbent substrates, COTEFILM SOLVENT PRIMER may be used.
Then apply the COTEFILM NG LISO or COTEFILM NG RUGOSO layer or layers according to the systems described above. It is very important that the aqueous primer is wet, have a mordant, when applying the first coat of COTEFILM NG LISO. Otherwise, the media will be reprinted. It is very important that the applicator verifies that the quantities of product that are deposited coincide with the technical specifications (see yields), since the capacity of absorption of fissures is related to the thickness of the deposited film. A higher film thickness cracking absorption capacity. COTEFILM NG FLAT is always applied without dilution.
Extra Information About Your Performance:
PERFORMANCE COTEFILM NG WATERPROOFING SYSTEM SMOOTH:
CAP: COTEFILM AQUATIC PRIMER / COTEFILM SOLVENT PRIMER Yield: 5-10 m2 / l.
CAP: COTEFILM NG FLAT undiluted.
Yield: 2.2 m 2 / l. Absorption of cracks up to 1 mm
PERFORMANCE COTEFILM NG SEALING SYSTEM SMOOTH:
CAP COTEFILM AQUATIC PRIMER / COTEFILM SOLVENT PRIMER Yield: 5-10 m2 / l.
CAP COTEFILM NG FLAT undiluted. Yield: 2.2 m 2 / l.
Acrylic sealer to the water,specially penetrating to fix parameters(walls,floors,etc.) in external and in interiors.Great penetration and application easiness.On the fixer to the water all the paintings can be applied to the water(plastic paintings,linings,waterproofing,etc... etc.)
Superelastic and waterproof coating formulated with pure acrylic resins, photoreticants in aqueous phase and pigments of complete fastness to the light and the weather.Self-cleaning.
Waterproofing super-elastic acrylic coating based on photorefractive pure acrylic copolymers in aqueous dispersion, selected extenders and stable pigments.Especially indicated for the protection and decoration of construction surfaces where cracks up to 1 mm exist or are foreseen
Superelastic and waterproof coating formulated with pure acrylic resins, photoreticants in aqueous phase and pigments of complete fastness to the light and the weather.Self-cleaning.
Waterproofing super-elastic acrylic coating based on photorefractive pure acrylic copolymers in aqueous dispersion, selected extenders and stable pigments.Especially indicated for the protection and decoration of construction surfaces where cracks up to 1 mm exist or are foreseen