Description

Siloxane-based facade cladding in aqueous phase, very adherent, water repellent and permeable to water vapor.

Applications

• Protection and decoration of the usual supports in construction of facades such as: concrete, mortar, brick, stone, cement mortar, plastic paint, etc.
• Application as decoration and protection in interior walls in buildings and premises of intensive use.
  

Properties

• Effect perleo, that is to say, totally impermeable to the water of rain.
• Excellent adhesion on the usual surfaces in the construction.
• Maximum resistance to the weather, to the U.V. And ozone.
• Breathable, that is, permeable to water vapor.
• Higher color resistance.
• It preserves the appearance of the stone supports.
• Repels the dirt while maintaining the appearance of the facade.
• Ecological: does not contain residual solvents.
• Excellent resistance to microorganisms.
  

How to use

• Preparation of the support:
  

The surface to be painted must be consistent, clean and dry, with no old badly adhered paint or dust, grease, efflorescence, etc.

On smooth, low-absorbent substrates, the surface must be treated in order to open the pore and allow the anchorage of the paint, both mechanically and with a mixture of hydrochloric acid: Water (1: 2), allowing it to act 10-15 Minutes and washing with plenty of water then.

• Application of the product:
  

Apply the first coat of ÄBSYDE diluted with 5-10 € of water. From 4 hours give the second hand of pure ÁBSYDE.

Tools: Roller, brush, air gun or airless spray gun

Cleaning: With water at the end of work with fresh product

Drying time:

• To touch: 1 hour
• Total: 24 hours
  

Overcoating time: From 4 hours

Appearance: Smooth, Mineral Matte.

Yield: 4-5 m² / l in two layers.