Smooth coating paint for exterior use, based on acrylic copolymers in emulsion. Intermixable colours. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable.
Description
Smooth acrylic coating with good coverage and adhesion for facades and exterior walls. Formulated based on stable inorganic dispersion acrylic copolymers. Matte finish.
Applications
Protection and decoration of the usual supports in construction of facades such as: concrete, mortar, brick, stone, cement mortar, plastic paint, etc. Application as decoration and protection in interior walls in buildings and premises of intensive use.
Properties
How to use
The approximate yield of product is of 5-6 m2 / l in two layers depending on the uniformity and degree of absorption of the support.
Tools: Brush, Roller, air gun or airless spray gun
Cleaning: Cona water
Drying: 6 hours
Repainting: from 24 hours
Appearance: Smooth Matte
Water-based fixative sealer, with high penetrating performance. For indoor and outdoor use. To prime surfaces before painting them. Dilute 1 part fixative with 3-4 water.
Especially suitable for:
Unsound or highly porous walls and ceilings made out of plaster, concrete or brick.
To seal or reinforce old paints before recoating.
Smooth finish coating. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable
Upmarket smooth acrylic coating 100% acrylic finish matte, highly resistant to atmospheric agents. Totally waterproof ro rainwater. Extreme weatherability and UV resistance. Permeable to water vapour, allowing the support to breathe. Unalterable Colors. Washability.
Smooth solvent-based acrylic coating for pliolite-resin based façades. Exceptional adhesion on all types of construction materials, including wet substrates or in very difficult conditions. Waterproof and completely breathable.
Coating for siloxane-resin based façades that stand up very well to alkalinity and atmospheric agents.. Fully breathable. Completely repaintable. Complies with DIN 18558. ECOLOGICAL. Repels dirt.
Nature 70 Padded, façades and outdor surfaces. Maximum covering power and 70 mm. diameter for maximum performance and minimum splash.
Recommended use: Façades and outdor surfaces
Bicolor 60 Padded, façades and outdor surfaces. Maximum covering power and 60 mm. diameter for maximum performance.
Recommended use: Façades and outdoor surfaces
Rough stone coating, highly resistant to alkalinity and atmospheric agents. Protection and decoration of façades in general. Textured coating.High resistance to weathering.. Waterproof. Breathable. It contains antimould preservative. For protecting and waterproofing single-coat mortars. It masks the surface irregularities.
High-quality acrylic facade cladding with maximum waterproofing, covering, adhesion and durability. Waterproof and Breathable. High resistance to weathering, UV rays and ozone.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Revestimiento de gama alta 100% acrílico con máximo poder impermeabilizante, cubrición, adherencia y durabilidad. Mate sedoso
Product for removing and cleaning saltpetre and mould growth on masonry and brickwork surfaces.
Hormipres AQ is a finishing varnish for concrete and printed concrete floors based on water-based acrylic resin. With a whitish appearance that forms a transparent and shiny film when dry. Use in outdoor and indoor pavements.
Bricogar facades is a paint coating gives the surface to be painted, finished to very good durability. Due to its composition and balance formula, we obtain a breathable surface and a delay in aging facades.
COTEFILM NG is an ultra elastic smooth acrylic coating specially formulated to prevent water seepage from outside. Anti-Fracture (able to seal hairline cracks up to 2 mm). Self-cleaning. Permeable to water vapour, allowing the support to breathe. Impermeable to rainwater.
Upmarket smooth acrylic coating 100% acrylic finish matte, highly resistant to atmospheric agents. Totally waterproof ro rainwater. Extreme weatherability and UV resistance. Permeable to water vapour, allowing the support to breathe. Unalterable Colors. Washability.
Waterproofing and decorative coating formulated from acrylic copolymers in aqueous solution, inorganic pigments and selected fillers, for exteriors and interiors.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Pintamax Facades Coating is a paint for exterior and interior with protection of mold and verdin. The quality if the pigments and materials that are used to give color and obtain a long durability in the surfaces to paint, provide a guarantee for 5 years, in its low degradation and permanent quality.
Chat with us on WhatsApp
Español
Français
