High-quality acrylic facade cladding with maximum waterproofing, covering, adhesion and durability. Waterproof and Breathable. High resistance to weathering, UV rays and ozone.
Description
High-end acrylic facade cladding with maximum waterproofing, covering, adhesion and durability.
Application
Properties
How to use
The surface to be painted should be consistent and clean. Apply the first coat of REVETÓN CUBIC diluted with 10% -15% water. From 2 Hours give the second hand with REVETÓN CUBIC pure or with 10% water.
The surface to be painted should not have old, poorly adhered paint, grease or efflorescence. On very absorbent or deteriorated substrates, apply previously COTEFILM AQUA PRIMER or TOLLENS IMPRIMACIÓN FJADORA according to product data sheet
Apply the REVETÓN CUBIC as in the previous section.
The approximate yield of product is of 5-6 m2 / l in two layers.
Tools: Roller, brush, air gun or airless spray gun.
Cleaning: With water at the end of work with fresh product.
Drying time: 2 h
Recoat time: From 2 h
Appearance: Smooth smooth textured matt
Water-based fixative sealer, with high penetrating performance. For indoor and outdoor use. To prime surfaces before painting them. Dilute 1 part fixative with 3-4 water.
Especially suitable for:
Unsound or highly porous walls and ceilings made out of plaster, concrete or brick.
To seal or reinforce old paints before recoating.
Upmarket smooth acrylic coating 100% acrylic finish matte, highly resistant to atmospheric agents. Totally waterproof ro rainwater. Extreme weatherability and UV resistance. Permeable to water vapour, allowing the support to breathe. Unalterable Colors. Washability.
Smooth coating paint for exterior use, based on acrylic copolymers in emulsion. Intermixable colours. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable.
Acrylic sealer to the water,specially penetrating to fix parameters(walls,floors,etc.) in external and in interiors.Great penetration and application easiness.On the fixer to the water all the paintings can be applied to the water(plastic paintings,linings,waterproofing,etc... etc.)
Nature 70 Padded, façades and outdor surfaces. Maximum covering power and 70 mm. diameter for maximum performance and minimum splash.
Recommended use: Façades and outdor surfaces
Bicolor 60 Padded, façades and outdor surfaces. Maximum covering power and 60 mm. diameter for maximum performance.
Recommended use: Façades and outdoor surfaces
Waterproofing super-elastic acrylic coating based on photorefractive pure acrylic copolymers in aqueous dispersion, selected extenders and stable pigments. Especially indicated for the protection and decoration of construction surfaces where cracks up to 1 mm exist or are foreseen
Smooth finish coating. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable
High quality silicate paint, matte finish, especially indicated for the protection and embellishment of facades. It is especially suitable for the protection of mineral surfaces: lime and / or cement plasters, gypsum, brick, concrete, stone, fiber cement, etc., both in new and restorative works such as houses, schools, hospitals, public buildings, monuments.
Coating for siloxane-resin based façades that stand up very well to alkalinity and atmospheric agents.. Fully breathable. Completely repaintable. Complies with DIN 18558. ECOLOGICAL. Repels dirt.
High quality silicate paint, matte finish, especially indicated for the protection and embellishment of facades. It is especially suitable for the protection of mineral surfaces: lime and / or cement plasters, gypsum, brick, concrete, stone, fiber cement, etc., both in new and restorative works such as houses, schools, hospitals, public buildings, monuments.
COTEFILM NG is an ultra elastic smooth acrylic coating specially formulated to prevent water seepage from outside. Anti-Fracture (able to seal hairline cracks up to 2 mm). Self-cleaning. Permeable to water vapour, allowing the support to breathe. Impermeable to rainwater.
Waterproofing and decorative coating formulated from acrylic copolymers in aqueous solution, inorganic pigments and selected fillers, for exteriors and interiors.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Hormipres AQ is a finishing varnish for concrete and printed concrete floors based on water-based acrylic resin. With a whitish appearance that forms a transparent and shiny film when dry. Use in outdoor and indoor pavements.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Elastic and waterproof coating for roof treatment that facilitates the reflection of sunlight and reduces the heat transmission inside the building.
Thermo-reflective insulation, facilitates the reflection of sunlight and reduces the heat transmission inside the building, achieving greater thermal comfort and a considerable energy saving in air conditioning.
Chat with us on WhatsApp
Español
Français
