• -35%
    WATER PRESSURE FIXER INTERIOR-EXTERIOR WALLS for new or deteriorated work surfaces TOLLENS

WATER-BASED FIXATIVE SEALER FOR INDOOR AND OUTDOORS USE. Unsound or highly. To seal or reinforce old paints. TOLLENS

€124.64
€81.02 Save 35%
Tax included

Water-based fixative sealer, with high penetrating performance. For indoor and outdoor use. To prime surfaces before painting them. Dilute 1 part fixative with 3-4 water.

Especially suitable for:

Unsound or highly porous walls and ceilings made out of plaster, concrete or brick.

To seal or reinforce old paints before recoating.

size : 4L.
Color : incoloro
Quantity
Add to wishlist

Description
Consolidating primer, based on fine particle acrylic copolymers
. Water-based fixative sealer, with high penetrating performance. For indoor and outdoor use. To prime surfaces before painting them and ensure a right application of the paint topcoats.
Main Properties

  • Water base
  • Fast dry
  • Unify the absorption of the support
  • Reduces consumption of paint finish
  • Insulator and fixative
  • Indoor - Outdoor

Applications

Suitable for the treatment of building materials with porous surfaces, such as plaster, mortar, concrete, brick, etc. To which it seals and consolidates, also improving the adherence of the finishing paint.

Especially suitable for unsound or highly porous walls and ceilings made out of plaster, concrete or brick. To seal or reinforce old paints before recoating

PREPARING THE SUPPORT

The surface to be painted must be dry and clean, without old paint badly adhered, no loose particles, dust, grease, oil, wax, grease, etc.

  • Surfaces already painted or old, in good condition wash or brush beforehand to remove paint residue and to sand defective areas. In bad condition, remove the paint completely to later apply the Tollens primer.
  • Defective and cracked surfaces, in addition to the above considerations, the affected areas must be filled and leveled with the most suitable product in the putty line. Allow to dry, level the surface with a sandpaper and remove the dust with a damp cloth.

Dilution and use:

Homogenize the product before application. Apply to roller, brush or spray gun. Product ready to use by roller or brush. In the case of airless spray, dilute with water to the appropriate viscosity. Use tools to be cleaned by washing them with water.

  • New or very porous surfaces: dilute previously in the proportion: 1 part of Primer Fixer in 3 parts of water.
  • Old or deteriorated surfaces: give a more diluted 1st coat: 1 part Fixative primer for 5 parts water.

Yield: 10-12m² / l

Drying: 3 hours

Repainting: 4 hours

Application: Indoor / Outdoor

Tools: brush, roller or pistol

Number of layers: 1 layer

New

You might also like

Antidrop Super, smooth surfaces with acrylic latex paint. Very good covering power and superior polyamide, 11 mm.

  • Very good covering power.
  • Manufactured by thermofusion to avoid sewing points.
  • Superior polyamide, 11 mm.

Recommended use: Smooth surfaces with acrylic latex paint

16 other products in the same category:

WATER BASED UNIVERSAL PRIMER FOR INDOOR OR OUTDOOR. Excellent adhesion primer coat for a great variety surface for Cement, Plaster, Pvc, Cardboard, Plaster, Iron, Temple and Wood. It has a quick drying, no odor, NO TOXIC. INDOOR OR OUTDOOR and could even be repainted with solvent-based enamels
In addition to having the Certificate of ECOLABEL.

Quick-drying water-based primer for all kinds of surfaces. Excellent adhesion primer coat for a great variety of previously painted or bare surfaces

Protection against rust on iron surfaces. Adhesion primer for surfaces such as: galvanised (zinc plating), aluminium, steel, brass, copper, hard PVC, methacrylate, expanded polyurethane, melamine and tile. Excellent sealer for wood

Indoor-Outdoor

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.