Español
Français
- -48%
Smooth finish coating. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable
PINTAMAX FACADE COATING IS A PAINT FOR EXTERIOR AND INTERIOR WITH PROTECTION OF MOLD AND VERDIN GILMAPIN
€137.46
€71.48
Save 48%
Tax included
Pintamax Facades Coating is a paint for exterior and interior with protection of mold and verdin. The quality if the pigments and materials that are used to give color and obtain a long durability in the surfaces to paint, provide a guarantee for 5 years, in its low degradation and permanent quality.
Description
Pintamax facade cladding is a paint for exterior and interior with protection from mold and mildew. The quality of the pigments and materials that are used to give color and obtain a long durability in the surfaces to be painted, provide a guarantee of 5 years, in its low degradation and permanent quality.
Properties:
- Good coverage and performance.
- Protection against mold and mildew.
- Great leveling
- Stable colors
Applications
Finished paint intended for indoor and outdoor use, applicable on surfaces where decorating is required painting.
Characteristics
- Matte finish
- Performance: 7 to 8 m2 / L (according to support, by applied hand and dilution)
How to use:
- Application temperature: 5ºC and 30ºC on the surfaceDilution: Apply a first coat diluted to 10%, and for the second dilute a maximum of 5%
- Application tools: Brush, roller or gun (in the latter case, use a mask)
- Drying time: At touch 30 min, dry from 4 to 6 hours according to room temperature. The repainting should be done after 4 to 6 hours at least.
- Cleaning tools: With water, immediately after use and before it dries.
- Preparation of the surface: The surface must be clean and dry. On surfaces contaminated with molds, fungi and algae, carefully wash the affected area preferably with specific cleaners (diluted biocides) using mechanical means (brushes, sponges, etc).
- Then wait 6 to 8 hours, wash the area thoroughly with water and once dry apply the paint. Old areas with poorly adhering layers of paint and efflorescence should be removed by brushing and deep scraping.
- If the surface is very absorbent, apply a primer coat (priming primer to water or solvent).
- If the surface is previously painted and is in good condition, apply the product directly.
- It is recommended to give two coats of PINTAMAX COATING to obtain a perfect finish.
PAINTS GILMAPIN S.L. certifies the product PINTAMAX FACADE COATING due to its manufacturing process and composition, is suitable for its internal-external application, as long as the support is in the ideal conditions and its application is in accordance with the instructions of this Technical Data Sheet. That is why we guarantee this product for a period of 5 YEARS
You might also like
Smooth coating paint for exterior use, based on acrylic copolymers in emulsion. Intermixable colours. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable.
Nature 70 Padded, façades and outdor surfaces. Maximum covering power and 70 mm. diameter for maximum performance and minimum splash.
- Maximum covering power.
- 70 mm. diameter for maximum performance and minimum splash.
- Manufactured with internal polyurethane foam for better adaptation to irregular surfaces.
- 100% Extra long Polyamide 20 mm.
Recommended use: Façades and outdor surfaces
Bicolor 60 Padded, façades and outdor surfaces. Maximum covering power and 60 mm. diameter for maximum performance.
- Maximum covering power.
- 60 mm. diameter for maximum performance.
- Manufactured with internal polyurethane foam for berrer adaptation to irregular surfaces.
- 100% Extra long Polyamide 20 mm.
Recommended use: Façades and outdoor surfaces
High-quality acrylic facade cladding with maximum waterproofing, covering, adhesion and durability. Waterproof and Breathable. High resistance to weathering, UV rays and ozone.
16 other products in the same category:
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
- FINISH
SMOOTH ACRYLIC COATING FOR PROTECTION AND DECORATION OF FAÇADES
- Outside: facades and other facades. Patios of lights
- Inside: kitchens, bathrooms. Ladder boxes. Public places
Ideal for application on walls and ceilings, and especially for home bathrooms and kitchens
With anti-mold preservative and a great resistance to the weather in addition to being resistant to friction and wear (washable)
High quality silicate paint, matte finish, especially indicated for the protection and embellishment of facades. It is especially suitable for the protection of mineral surfaces: lime and / or cement plasters, gypsum, brick, concrete, stone, fiber cement, etc., both in new and restorative works such as houses, schools, hospitals, public buildings, monuments.
Elastic and waterproof coating for roof treatment that facilitates the reflection of sunlight and reduces the heat transmission inside the building.
Thermo-reflective insulation, facilitates the reflection of sunlight and reduces the heat transmission inside the building, achieving greater thermal comfort and a considerable energy saving in air conditioning.
COTEFILM NG is an ultra elastic smooth acrylic coating specially formulated to prevent water seepage from outside. Anti-Fracture (able to seal hairline cracks up to 2 mm). Self-cleaning. Permeable to water vapour, allowing the support to breathe. Impermeable to rainwater.
Coating for siloxane-resin based façades that stand up very well to alkalinity and atmospheric agents.. Fully breathable. Completely repaintable. Complies with DIN 18558. ECOLOGICAL. Repels dirt.
High quality silicate paint, matte finish, especially indicated for the protection and embellishment of facades. It is especially suitable for the protection of mineral surfaces: lime and / or cement plasters, gypsum, brick, concrete, stone, fiber cement, etc., both in new and restorative works such as houses, schools, hospitals, public buildings, monuments.
Superelastic and waterproof coating formulated with pure acrylic resins, photoreticants in aqueous phase and pigments of complete fastness to the light and the weather. Self-cleaning.
High-quality acrylic facade cladding with maximum waterproofing, covering, adhesion and durability. Waterproof and Breathable. High resistance to weathering, UV rays and ozone.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
- FINISH
Smooth finish coating. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable
Product for removing and cleaning saltpetre and mould growth on masonry and brickwork surfaces.
Chat with us on WhatsApp
