Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Description
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Applications
Properties
How to use
REVETON 5000 is applied on all types of supports, concrete, cement mortar, plaster (prior primer) etc ... The plaster must be aristado, masestreado and fine fratasado.
The surface must have a clean surface of dust and grease.
A primer coat will be given as a primer (for example: LIQUID SIMILAR), diluted to 30% of the same color as that chosen for the thin layer with REVETON 5000 to mask possible glazing.
From the 4-6 hours the second layer with the REVETON 5000 will be given by conventional trowel, in a single pass, uniformly regulating the thickness.
To finish the finish, once the product has been extended into a uniform layer, the finishing will be done by a trowel of wood or plastic with the circular movement and the striped finish in movement from top to bottom.
For the treatment of large surfaces and to avoid the joints of work, it is advisable to dismantle it in panels of about 15m² / l, which will be done with adhesive tape.
The yield: 2.5 and 2.7 kg / m² according to support
Tools:
Manual application: Pattern roller, honeycomb roller, stainless steel trowel and fratas
Cleanliness: Abundant water
Drying: approx. 6-8 hours.
Consolidation: 3 weeks
Average particle size: 1.6 mm
Maximum particle size: 1,8 mm
Water-based fixative sealer, with high penetrating performance. For indoor and outdoor use. To prime surfaces before painting them. Dilute 1 part fixative with 3-4 water.
Especially suitable for:
Unsound or highly porous walls and ceilings made out of plaster, concrete or brick.
To seal or reinforce old paints before recoating.
Smooth coating paint for exterior use, based on acrylic copolymers in emulsion. Intermixable colours. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable.
Acrylic sealer to the water,specially penetrating to fix parameters(walls,floors,etc.) in external and in interiors.Great penetration and application easiness.On the fixer to the water all the paintings can be applied to the water(plastic paintings,linings,waterproofing,etc... etc.)
Acrylic coating in thick, waterproof and decorative layer of medium granular finish. Excellent protection of the supports in the open. Resistance to atmospheric dirt. High permeability to water vapor. Great aesthetic possibilities and luminosity
Rough stone coating, highly resistant to alkalinity and atmospheric agents. Protection and decoration of façades in general. Textured coating.High resistance to weathering.. Waterproof. Breathable. It contains antimould preservative. For protecting and waterproofing single-coat mortars. It masks the surface irregularities.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Elastic and waterproof coating for roof treatment that facilitates the reflection of sunlight and reduces the heat transmission inside the building.
Thermo-reflective insulation, facilitates the reflection of sunlight and reduces the heat transmission inside the building, achieving greater thermal comfort and a considerable energy saving in air conditioning.
Smooth finish coating. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable
Waterproofing and decorative coating formulated from acrylic copolymers in aqueous solution, inorganic pigments and selected fillers, for exteriors and interiors.
High-quality acrylic facade cladding with maximum waterproofing, covering, adhesion and durability. Waterproof and Breathable. High resistance to weathering, UV rays and ozone.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Superelastic and waterproof coating formulated with pure acrylic resins, photoreticants in aqueous phase and pigments of complete fastness to the light and the weather. Self-cleaning.
Upmarket smooth acrylic coating 100% acrylic finish matte, highly resistant to atmospheric agents. Totally waterproof ro rainwater. Extreme weatherability and UV resistance. Permeable to water vapour, allowing the support to breathe. Unalterable Colors. Washability.
Product for removing and cleaning saltpetre and mould growth on masonry and brickwork surfaces.
Hormipres AQ is a finishing varnish for concrete and printed concrete floors based on water-based acrylic resin. With a whitish appearance that forms a transparent and shiny film when dry. Use in outdoor and indoor pavements.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Bricogar facades is a paint coating gives the surface to be painted, finished to very good durability. Due to its composition and balance formula, we obtain a breathable surface and a delay in aging facades.
Chat with us on WhatsApp
Español
Français
