Smooth solvent-based acrylic coating for pliolite-resin based façades. Exceptional adhesion on all types of construction materials, including wet substrates or in very difficult conditions. Waterproof and completely breathable.
Description
Pliolite ® resin based facade cladding, matt smooth finish, and applied to all types of masonry surfaces.
Applications
Properties
How to use
The surface to be painted should be consistent and clean. Apply the first hand of diluted TEXLITE with 10-15% of White Spirit. After 4 hours give the second hand with pure TEXLITE or diluted with a maximum of 5% White Spirit.
The surface to be painted should not have old paint, poor adhesion, grease and efflorescence. Apply the TEXLITE as in the previous section. Do not apply to elastic paints.
The yield: ranges from 4-8 1m² / l approx. Depending on the uniformity and degree of absorption of the support.
Tools: Roller, Brush or Airless Pistol
Cleaning: with White Spirit or Similar
Drying:
Upmarket smooth acrylic coating 100% acrylic finish matte, highly resistant to atmospheric agents. Totally waterproof ro rainwater. Extreme weatherability and UV resistance. Permeable to water vapour, allowing the support to breathe. Unalterable Colors. Washability.
COTEFILM NG is an ultra elastic smooth acrylic coating specially formulated to prevent water seepage from outside. Anti-Fracture (able to seal hairline cracks up to 2 mm). Self-cleaning. Permeable to water vapour, allowing the support to breathe. Impermeable to rainwater.
Smooth coating paint for exterior use, based on acrylic copolymers in emulsion. Intermixable colours. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable.
Revestimiento de gama alta 100% acrílico con máximo poder impermeabilizante, cubrición, adherencia y durabilidad. Mate sedoso
Nature 70 Padded, façades and outdor surfaces. Maximum covering power and 70 mm. diameter for maximum performance and minimum splash.
Recommended use: Façades and outdor surfaces
Bicolor 60 Padded, façades and outdor surfaces. Maximum covering power and 60 mm. diameter for maximum performance.
Recommended use: Façades and outdoor surfaces
High quality silicate paint, matte finish, especially indicated for the protection and embellishment of facades. It is especially suitable for the protection of mineral surfaces: lime and / or cement plasters, gypsum, brick, concrete, stone, fiber cement, etc., both in new and restorative works such as houses, schools, hospitals, public buildings, monuments.
Waterproofing super-elastic acrylic coating based on photorefractive pure acrylic copolymers in aqueous dispersion, selected extenders and stable pigments. Especially indicated for the protection and decoration of construction surfaces where cracks up to 1 mm exist or are foreseen
Superelastic and waterproof coating formulated with pure acrylic resins, photoreticants in aqueous phase and pigments of complete fastness to the light and the weather. Self-cleaning.
Smooth coating paint for exterior use, based on acrylic copolymers in emulsion. Intermixable colours. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
High-quality acrylic facade cladding with maximum waterproofing, covering, adhesion and durability. Waterproof and Breathable. High resistance to weathering, UV rays and ozone.
Elastic and waterproof coating for roof treatment that facilitates the reflection of sunlight and reduces the heat transmission inside the building.
Thermo-reflective insulation, facilitates the reflection of sunlight and reduces the heat transmission inside the building, achieving greater thermal comfort and a considerable energy saving in air conditioning.
Pintamax Facades Coating is a paint for exterior and interior with protection of mold and verdin. The quality if the pigments and materials that are used to give color and obtain a long durability in the surfaces to paint, provide a guarantee for 5 years, in its low degradation and permanent quality.
Coating for siloxane-resin based façades that stand up very well to alkalinity and atmospheric agents.. Fully breathable. Completely repaintable. Complies with DIN 18558. ECOLOGICAL. Repels dirt.
High quality silicate paint, matte finish, especially indicated for the protection and embellishment of facades. It is especially suitable for the protection of mineral surfaces: lime and / or cement plasters, gypsum, brick, concrete, stone, fiber cement, etc., both in new and restorative works such as houses, schools, hospitals, public buildings, monuments.
Chat with us on WhatsApp
Español
Français
