Description
Extra-matte water-based enamel, formulated with acrylic resins that do not yellow in the interior and special additives that repel stains. Very washable and resistant to bumps and scratches. Its excellent leveling, brochability and coverage allow to achieve high quality finishes.
Main Properties
- Non-yellowing.
- Very washable
- Excellent brochability, leveling and coverage
- Interior Exterior
- Good behavior to cuts and revisions
- Proven Stain Resistance: In order to remove stains easily, we recommend cleaning them with a damp cloth and soap in the time indicated in the following table once the stain has occurred.
Applications
Enamel to protect and beautify those interior surfaces where greater resistance to staining, frequent washing and rubbing is required. For doors, windows,
Furniture, plasterboard and other elements of iron, wood and other materials used in construction. Ideal for enclosed spaces as the absence of smell allows to work indoors without having to cease the daily activity of the room.
PREPARING THE SUPPORT
Surfaces must always be clean, dry and free of grease, dust and rust. Enamel EXTRA MATE ACRYLIC ENAMEL Tollens has a great adhesion on wood, plaster, cement, iron, copper, steel, glass, PVC and galvanized. For quality finishes we recommend to prepare the surfaces as indicated below:
- Unpainted surfaces:
- Iron, rust, steel: Remove loose rust with a barbed brush and degrease. For good anti-corrosion protection we recommend the Tollens Antioxidant Primer.
- Wood: For a lacquered effect, we recommend applying Tollens Sealer with foam roller and sanding smoothly between layers, eliminating the resulting dust.
- Plaster, cement, plaster: Apply Tollens Fixer and smooth sanding between layers, eliminating the resulting dust.
- PVC, galvanized, glass, aluminum, tiles: Apply Primer Maximum adhesion Tollens and smooth sanding between layers, eliminating the resulting dust.
- Gypsum Board Plates: Apply Universal Primer or Tollens Sealer and smooth sanding between layers, eliminating the resulting dust.
- Surfaces already painted with enamels or plastic paint:
If the paint is well adhered, wash and proceed with a light sanding, clean the resulting powder and apply Tollens enamel directly. If it is badly adhered, remove it and proceed as on unpainted surfaces.
Yield: 12-14 m² / Lt (approximate and according to stand).
Drying:
- At touch (1 hour),
- Total: (1-2 hours)
Repainting: From 4-6 hours
Application: Brush, enamel brush, thread roller, foam roller or gun (depending on the support and desired finish)
Number of layers: Two. Depending on the porosity of the support and for certain intense colors and according to the background color on which it is painted, it may be necessary to apply some additional layer.
On yellow or red colors, we recommend a white background.
Application tools: Brush, enamel brush, thread roller, foam roller or gun (depending on the support and desired finish).
Dilution:
- Product ready for use.
- For spray gun must be diluted maximum 15% with water to achieve the proper viscosity.
Cleaning: Water.
CERTIFICATIONS
- Eco-label label "ECOLOGICAL ECOLOGICAL LABEL": According to file ESCAT / 007/004 issued by the Generalitat of Catalonia (Low air pollution, Energy efficiency and Reduced Toxicity).
- VERY WASHABLE meets UNE-EN ISO 11.998 CLASS 2
- VERY CUBRIENTE: ISO 6504/1 standard in CLASS 2
- Emission in indoor air (A +)
- No toxicity according to UNE-EN 71-3
- Certification Euroclass reaction to fire in category B-s1, d0