• -40%
    ESMALTE ANTIOXIDANTE FORJA GRANO FINO

METALLIC BLUING-LIKE FINISH PAINT WITH HIGH SOLID CONTENT High elasticity and weathering resistance

€154.98
€92.99 Save 40%
Tax included

Metallic paint with high solid content. Direct application, no primer is needed. High adhesion. High elasticity and weathering resistance. Excellent protection and decoration for any kind of iron surface to which it provides a natural metallic finish (bluing-like).

size : 4L.
Color : Gris Acero 402
Quantity
Add to wishlist

Description

Blued antioxidant enamel finish (fine-grained) applied directly on iron oxide. Anticorrosive pigments with zinc and particulate micaceous iron high lamellarity, provides excellent protection against oxidation.

Main Properties

  • Excellent protection against corrosion Soft touch and easy to clean
  • Excellent adhesion
  • No cracks
  • Thanks to its formulation with alkyd resins, it is very brocheable and easy to apply.
  • Its drying time allows the product to be worked without any touch-ups being noticed.
  • Long-lasting finish resistant to UV rays.

CERTIFICATIONS

  • Certification Euroclasses of reaction to the fire in category B s1 d0
  • UNE 48316: 2014 High performance anticorrosive decorative enamels (certificate available from 1/4/2016)
  • UNE 12944-6: 1999 Protection of steel structures from corrosion to grade C4 Media (certificate available from 01/04/2016)
  • UNE 9227: 2007. Salt spray test than 100 microns (certificate available from 04/01/2016)
  • UNE 6272-1, 1520 and 1519: Impact resistance, flexibility and drawing

APPLICATIONS

For doors, lampposts, fences, railings, furniture, steel structures, machinery and iron anything outside or inside.

Appearance: Bluing (fine-grained)

Yield: 10 to 12 m² / Lt (approximate and as support).

Drying (by color, thickness applied and room temperature)

  • Total: 3-4 hours /
  • Repainting: 18-24 hours.

Number of layers:

In metal previously painted and in good condition, apply 1 hand. If it is discovered or rusty, apply two coats. On metal subject to extreme conditions, we recommend previously applied primer Antioxidant Tollens solvent (art.8700). Cover corners and edges well. In areas of welds apply three coats.

Application tools: Airbrush, roller or spray gun / air-less.

Cleaning Solvent

PREPARING THE SURFACE

The surfaces should be clean, dry and free from grease, dust and loose rust.

  • New iron and steel surfaces: Remove loose rust with wire brush and degreased.
  • Painted surfaces: If the paint is in good condition, wash and proceed to a light sanding. If it is not properly attached, remove paint with sandpaper and clean up the resulting powder. always remove loose rust with wire brush.
  • On galvanized, copper, aluminum and other non ferrous metals: Sanding to refine and apply a coat of primer on Galvanized Tollens solvent (art 8701.). For all other surfaces, consult the technical department of Cromology
New

You might also like

16 other products in the same category:

Antioxidant quick drying primer applied as additional protection to enamel on iron surfaces subjected to extreme climatic conditions, such as coastal areas of sea, high mountains and highly oxidized surfaces. For doors, street lamps, bars, railings, furniture and any iron element in exterior or interior.

Quick drying rustproof enamel-paint. Direct application on steel, no primer is needed. It provides up 10 years weathering resistance and a high gloss finish. High adhesion. Hardwearing. Resistant to impact and scratches.

The use of Smooth OXIRON allows saving time because overcoating is possible after one hour and, in this way, most paint works can be finished in one single day.

Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. The decorative hammered appearance is smooth to the touch and sheds water well.  It is available in a variety of popular colours.

  • Can be applied directly onto rusty metal.
  • No need for primer or undercoat.
  • Can be applied by brush or roller.

High glossy water-based high adhesion antioxidant enamel. Very easy application on any kind of surface. Great flexibility and elastic.  Suitable for any kind and shape of materials. Once applied, it makes a  film which protects the coated items from moist and external agents. Good obliteration. Good resistance to mar and washes. It adheres to wood

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.