Quick drying rustproof enamel-paint. Direct application on steel, no primer is needed. It provides up 10 years weathering resistance and a high gloss finish. High adhesion. Hardwearing. Resistant to impact and scratches.

The use of Smooth OXIRON allows saving time because overcoating is possible after one hour and, in this way, most paint works can be finished in one single day. 

Fields of Application

Indoors and outdoors. Very suitable for gratings, radiators, benches, electric appliances, doors.

Drying: 30 - 60 minutes

Recoat time: Minimum: 30 minutes. Maximum: 4 hours or after 5 days

Directions for use

• GENERAL REMARKS:

The surfaces to be painted have to be dry and free from any dirt, grease, poorly adhered rust particles and low quality old paints.

It is important to keep the overcoating time if a high quality finish is required. Every following coat has to be applied by the next 4 hours. If this time is exceeded, wait 5 days. If this is overcoating requirement is not fulfilled, the applied surface may show creasing. In case of application by spray-gun, the following coats can be applied after 15 - 30 minutes.

• BARE SURFACES:
  
  • Steel or Iron: It can be directly applied. No primer needed. If the surface shows rust, lightly sand in order to roughen the surface. Remove poorly adhered rust. In environments with medium-high corrosion, steel has to be sanded up to ST-3 of the UNE EN ISO 8501-1 standard. Under these conditions, a minimum thickness of 140 microns (3 dry coats) will be required.
  • Zinc, tin, galvanized: surfaces: Sand to matt and apply ALL PRIMER 4X4
  • Wood: Primer usual sealant based on alkyd resins.
  • Other surfaces: Please seek advice.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:

Wash with soapy water, let to dry, lightly sand and directly apply Smooth OXIRON.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:

Thoroughly remove rust and poorly adhered previous coats by means of sandpaper or a metallic brush. For topcoats, proceed as for bare surfaces

DRYING: 30 - 60 minutes

APPLICATION METHODS:Brush, roller and spray-gun

Finish: Gloss