Description
Multisurface primer to water, made with special resins of great adhesion on most surfaces.
Main Properties
- Water base
- Fast dry
- Without smell
- Excellent coverage
- Non toxic
- Interior Exterior
- Repaintable with any type of usual water-based paint as with solvent-based enamels.
Applications
For surfaces such as cement, plaster, PVC, plasterboard, iron, non-ferrous materials, mortar, temper and wood.
PREPARING THE SUPPORT
The surface to be painted must be dry and clean, with no rust, no badly adhered paint, no loose particles, dust, grease, oil, wax, grease, etc.
- Surfaces already painted or old, in good condition wash or brush beforehand to remove paint residue and to sand defective areas. In bad condition, remove the paint completely to later apply the Tollens universal primer.
- Defective and cracked surfaces, in addition to the above considerations, the affected areas must be filled and leveled with the most suitable product in the putty line. Allow to dry, level the surface with a sandpaper and remove the dust with a damp cloth.
Yield: 10-12m² / l
Drying: 2.5 hours
Repainting: 4 Hours (If applied with synthetic enamel finish let the primer dry 24 hours.)
Number of layers: 1 layer
Application: Indoor / Outdoor
Tools: Brush, roller or pistol
Dilution: Ready-to-use product, in case of airless spray, dilute with water to suitable viscosity.
Cleaning: Water