Español
Français
- -20%
White satin synthetic glaze with fast drying and high color stability and high temperature resistance
WHITE CEMENT Repairs in wet areas (bathrooms, kitchens...).
€5.42
€4.34
Save 20%
Tax included
Cement based hydraulic blender for indoor-outdoor uses. Repairs in wet areas (bathrooms, kitchens...). Fixing sanitation facilities and plumbing. Joints between walls and floors. Flooring and flooring base. Repairs on concrete, brick and stone (never on plaster). Mixed with sand can be used for masonry work. Smooth finish. No removal. White colour
FIELDS OF APPLICATION
- This preparation is a hydraulic binder that when mixed with sand and water is suitable for masonry work without the need to add other materials.
- Repairs in bathrooms and kitchens.
- Fixing of sanitary and plumbing.
- Placement of platelets, tiles and terraces.
- Termination in joints between walls and floors.
- Floors and base for floors.
- Repairs on concrete, stone or brick.
- Indoor and outdoor use.
- White color.
APPLICATION AND PREPARATION OF THE SUPPORT
- Support
The support must be flat, stable, resistant, dry and free of cracks or materials that reduce adhesion. Remove dust and clean the surface to be treated. Moisten the support before applying the product.
- Application
For bonding and bonding materials, add 0.35 l of water per 1 kg of white cement preparation and stir in the iron. If a thicker paste is desired, gradually add small amounts of product.
For repairs and fillings, mix with washed sand of compensated granulometry and add water to form a manageable paste. It is suggested:
- Encascados: 1 part prepared cement, 3 parts sand, 1 part water.
- Soils: 1 part prepared cement, 6 parts sand, 1 part water.
- Partition: 1 part prepared cement, 4 parts sand, 1 part water
To improve adhesion on old concrete, it is recommended to add NIVELPOL AR to the mass in the ratio of 1 liter per 5-10 kg mass.
Apply with a paddle or spatula.Clean the tool with water, immediately after use
PRECAUTIONS
Do not use at low temperatures or use on plaster, paints or joints of disintegrable materials. Open only the bags to be used
Mixture: 0.350 l of water per 1 kg of powder
Water retention: 80-95%
Tools: Pallet or trowel
Cleaning Tools: With water, immediately after use
Max Layer Thickness: 20 mm
Standby time: 5 minutes
Setting principle More than 1 hour
Setting time Less than 15 hours
Operating time: Approx. 3 hours
Theoretical Consumption: 1.5 kg / m2 in 1 mm layer
Drying Time: Variable according to thickness and environmental conditions
You might also like
FAST CEMENT .. Special product for sealing water leaks, repair and sewage joints and emergency work.
Some of its properties:
- Resistant to weathering and humidity. Raincoat
- Does not retract or crack once set.
- High strength and hardness
- etc.
PREPARED OF ESCAYOLA FOR MOLDINGS. Molding and repair in plaster Moldings, rosettes, soffits and false ceilings. Useful and economic- Filling of cracks and holes. Crafts. INSIDE
Very fine finish and great ease of sanding
16 other products in the same category:
Seals and fixes cracks and high movement joints Mid-modulus range polyurethane putty with capacity for both sealing cracks and high-movement joints and for fixing all kinds of materials
Ready for use plastic putty. Very white, hard and sandable product enabling exceptionally fine finishings. Does not repel joints. Interior. Smoothing of irregular bases, renewal of old bases, repair of scratches, bumps, scratches and surface micro fissures. Capping of wood pores.
Polyester filler. Especially suitable for quick works. Excellent adhesion on metal sheet. High refilling and levelling power. Thixotropic. Easy application in areas that are hard to reach.
To even and refill irregularities of the surfaces to be painted, both metallic or made of polyester. Especially suitable for super- structures.
Water-based acrylic filler (acrylic polymers). To be used indoors and outdoors. Its high flexibility absorbs alterations in the wood shape and size up to 20% caused by temperature changes. Because of its high glassfibre content, it has very good mechanical properties. High adhesion. It avoids breakage produced by structural changes
Filling of ceramic joints, terraces and floor tiles. Repair in swimming pools. Specially designed to fill and waterproof joints in floors and walls, ceramics with absorption capacity ≤ 3%, porcelain stoneware, vitreous mosaic, with natural stone platelets. Indicated to work in humid places like bathrooms, kitchens or swimming pools, in occasional or permanent contact with wate
PLASTER PLASTER. Filling of holes in interiors. Subjection of materials. It is commonly used in the fastening of boxes and electrical or plumbing materials. For indoor use. Plasterboard repairs.
FAST CEMENT .. Special product for sealing water leaks, repair and sewage joints and emergency work.
Some of its properties:
- Resistant to weathering and humidity. Raincoat
- Does not retract or crack once set.
- High strength and hardness
- etc.
Seal and refill, improves finishes Acid silicone sealant indicated to obtain a perfect sealing, avoiding water, air, and moisture leaks. Seals cracks and holes. European regulation on construction products
PREPARED OF ESCAYOLA FOR MOLDINGS. Molding and repair in plaster Moldings, rosettes, soffits and false ceilings. Useful and economic- Filling of cracks and holes. Crafts. INSIDE
Very fine finish and great ease of sanding
Imprimacion alto espesor para carrocerias,
To repair joints and chipped tiles and tiles. Reconstruction of edges and access of swimming pools. Repair anchors stairs or fasten, floors and walls, stoneware. Waterproofing.
Chat with us on WhatsApp
