FAST CEMENT .. Special product for sealing water leaks, repair and sewage joints and emergency work.
Some of its properties:
FIELDS OF APPLICATION
PROPERTIES
APPLICATION AND PREPARATION OF THE SUPPORT
Add half a liter of water per 1.5 kg of product. Mix and apply quickly with palette or spatula. This paste can be used for 3 minutes at 20 ° C.
In the case of sealing waterways, mix quickly with water to pasty consistency, in a plastic or rubber gloves and when setting begins apply it quickly at the point to be plugged, keeping pressed until the total setting occurs.
Clean the tools with water once the application is finished. Take into account that high temperatures accelerate the setting and the delays delay it.
PRECAUTIONS
Avoid excess water. Do not re-knead after setting begins. Do not apply on plaster or plaster.
Mixture: 0.3 l of water per 1 kg of powder
Tool: Smooth trowel or spatula
Cleaning Tool: With water, immediately after using
Working time at 20ºC: Approx. 3 - 6 minutes
Theoretical Consumption 1.5 kg / m2 in a layer of 1 mm
Drying: 24 hours
WATER BASED UNIVERSAL PRIMER FOR INDOOR OR OUTDOOR. Excellent adhesion primer coat for a great variety surface for Cement, Plaster, Pvc, Cardboard, Plaster, Iron, Temple and Wood. It has a quick drying, no odor, NO TOXIC. INDOOR OR OUTDOOR and could even be repainted with solvent-based enamels
In addition to having the Certificate of ECOLABEL.
Plaste powder white of last generation for indoor polyvalent jobs, where you need to save time, superior performance and a guaranteed result.
Applicable on any interior support, both absorbent (plaster, plasterboard, cement, concrete, wood, stone, etc.) as difficult or non-absorbent funds (old painted walls, gotele, tile, tile, glass, etc.
PREPARED OF ESCAYOLA FOR MOLDINGS. Molding and repair in plaster Moldings, rosettes, soffits and false ceilings. Useful and economic- Filling of cracks and holes. Crafts. INSIDE
Very fine finish and great ease of sanding
Filling of ceramic joints, terraces and floor tiles. Repair in swimming pools. Specially designed to fill and waterproof joints in floors and walls, ceramics with absorption capacity ≤ 3%, porcelain stoneware, vitreous mosaic, with natural stone platelets. Indicated to work in humid places like bathrooms, kitchens or swimming pools, in occasional or permanent contact with wate
High performance cement based adhesive. Applicable on supports made with brick, cement, stone, concrete and fiber-cement. Specially designed to glued tiles on masonry surfaces.
Cement based hydraulic blender for indoor-outdoor uses. Repairs in wet areas (bathrooms, kitchens...). Fixing sanitation facilities and plumbing. Joints between walls and floors. Flooring and flooring base. Repairs on concrete, brick and stone (never on plaster). Mixed with sand can be used for masonry work. Smooth finish. No removal. White colour
High performance cement based adhesive. Applicable on supports made with brick, cement, stone, concrete and fiber-cement. Specially designed to glued tiles on masonry surfaces.
Flexible putty in aqueous base reinforced with glass fibre for the filling of dynamic or structural cracks. Has permanent elasticity and excellent resistance to ageing. Indoor-Outdoor. For filling and sealing microcracks, cracks and structural fissures. For sealing joints and as a substitute for glass fiber tapes.
Seal and refill, improves finishes Acid silicone sealant indicated to obtain a perfect sealing, avoiding water, air, and moisture leaks. Seals cracks and holes. European regulation on construction products
Seals and fixes cracks and high movement joints Mid-modulus range polyurethane putty with capacity for both sealing cracks and high-movement joints and for fixing all kinds of materials
T-Rex Gold Power is a one-component, elastic, neutral and high-quality adhesive sealer based on SMX polymer with an extremely high initial adhesion of at least 400 kg / m².
To repair joints and chipped tiles and tiles. Reconstruction of edges and access of swimming pools. Repair anchors stairs or fasten, floors and walls, stoneware. Waterproofing.
Cement based hydraulic blender for indoor-outdoor uses. Repairs in wet areas (bathrooms, kitchens...). Fixing sanitation facilities and plumbing. Joints between walls and floors. Flooring and flooring base. Repairs on concrete, brick and stone (never on plaster). Mixed with sand can be used for masonry work. Smooth finish. No removal. White colour
Plaste powder white of last generation for indoor polyvalent jobs, where you need to save time, superior performance and a guaranteed result.
Applicable on any interior support, both absorbent (plaster, plasterboard, cement, concrete, wood, stone, etc.) as difficult or non-absorbent funds (old painted walls, gotele, tile, tile, glass, etc.
Filling of ceramic joints, terraces and floor tiles. Repair in swimming pools. Specially designed to fill and waterproof joints in floors and walls, ceramics with absorption capacity ≤ 3%, porcelain stoneware, vitreous mosaic, with natural stone platelets. Indicated to work in humid places like bathrooms, kitchens or swimming pools, in occasional or permanent contact with wate
Polyester filler. Especially suitable for quick works. Excellent adhesion on metal sheet. High refilling and levelling power. Thixotropic. Easy application in areas that are hard to reach.
To even and refill irregularities of the surfaces to be painted, both metallic or made of polyester. Especially suitable for super- structures.
PREPARED OF ESCAYOLA FOR MOLDINGS. Molding and repair in plaster Moldings, rosettes, soffits and false ceilings. Useful and economic- Filling of cracks and holes. Crafts. INSIDE
Very fine finish and great ease of sanding
Chat with us on WhatsApp
Español
Français
