Español
Français
Repair and seal joints and cracks Acrylic putty especially suitable for sealing cracks and small holes as well as for sealing joints with movement.. Can be painted with any type of paint
SEAL AND REFILL UNIVERSAL VERY ELASTIC ANTIMOHO. SOCIAL INTERIOR
€3.18
Tax included
Seal and refill, improves finishes Acid silicone sealant indicated to obtain a perfect sealing, avoiding water, air, and moisture leaks. Seals cracks and holes. European regulation on construction products
Product description
Universal silicone is a one-component, elastic and high-quality sealant based on silicones.
Properties
- Very easy to apply
- Does not fade and is resistant to ultraviolet rays
- Permanently elastic after curing
- Very good adhesion to many materials
- Typical acetic smell
- Weather resistant
Applications
- Construction and assembly joints.
- All types of joints and glazing.
- Union joints.
- Sealing in the construction of containers and cold rooms.
- Sealing in air conditioning systems
Dimensions of joints
- Minimum width of joints: 5 mm
- Maximum joint width: 30 mm
- Minimum depth of joints: 5 mm
- Recommendation for sealing tasks: joint width = 2 × joint depth.
Application Method
- Method of application: With manual or pneumatic caulking gun.
- Cleaning: Clean with turpentine or surface cleaner immediately after use.
- Finishing: With a soapy solution or Soudal's finishing solution before flaying.
- Repair: With the same material
Observations
- Do not use it on natural stones, such as marble, granite ... (staining). For these applications, use the silicone for natural stone of Soudal.
- Due to its acid nature, it can affect certain metals (such as copper or lead).
- Direct contact with the secondary sealing of the insulating glass units (insulation) and the PVB sheet of the safety glass should be avoided.
- The total absence of ultraviolet rays can cause the color change of the sealant.
- In acidic environments or dark rooms, the white silicone may become slightly yellow. Recovers its initial color under the influence of sunlight.
- When applying the finish with a finishing solution or soap solution, make sure that the solution does not come in contact with the surfaces. If that happens, the sealant will not adhere to that surface. Therefore, we recommend that only the finishing tool be immersed in this solution.
- We strongly recommend that you do not apply the product under intense sunlight, as it dries very fast.
- Do not use it on polycarbonate. Instead, use Silirub PC or Silirub AL.
- Do not use it in applications where its constant immersion in water can occur.
You might also like
T-Rex Gold Power is a one-component, elastic, neutral and high-quality adhesive sealer based on SMX polymer with an extremely high initial adhesion of at least 400 kg / m².
16 other products in the same category:
Imprimacion alto espesor para carrocerias,
FAST CEMENT .. Special product for sealing water leaks, repair and sewage joints and emergency work.
Some of its properties:
- Resistant to weathering and humidity. Raincoat
- Does not retract or crack once set.
- High strength and hardness
- etc.
Seal and refill, improves finishes Acid silicone sealant indicated to obtain a perfect sealing, avoiding water, air, and moisture leaks. Seals cracks and holes. European regulation on construction products
Cement based hydraulic blender for indoor-outdoor uses. Repairs in wet areas (bathrooms, kitchens...). Fixing sanitation facilities and plumbing. Joints between walls and floors. Flooring and flooring base. Repairs on concrete, brick and stone (never on plaster). Mixed with sand can be used for masonry work. Smooth finish. No removal. White colour
Seals and fixes cracks and high movement joints Mid-modulus range polyurethane putty with capacity for both sealing cracks and high-movement joints and for fixing all kinds of materials
Polyester filler. Especially suitable for quick works. Excellent adhesion on metal sheet. High refilling and levelling power. Thixotropic. Easy application in areas that are hard to reach.
To even and refill irregularities of the surfaces to be painted, both metallic or made of polyester. Especially suitable for super- structures.
High performance cement based adhesive. Applicable on supports made with brick, cement, stone, concrete and fiber-cement. Specially designed to glued tiles on masonry surfaces.
Filling of ceramic joints, terraces and floor tiles. Repair in swimming pools. Specially designed to fill and waterproof joints in floors and walls, ceramics with absorption capacity ≤ 3%, porcelain stoneware, vitreous mosaic, with natural stone platelets. Indicated to work in humid places like bathrooms, kitchens or swimming pools, in occasional or permanent contact with wate
PLASTER PLASTER. Filling of holes in interiors. Subjection of materials. It is commonly used in the fastening of boxes and electrical or plumbing materials. For indoor use. Plasterboard repairs.
Flexible putty in aqueous base reinforced with glass fibre for the filling of dynamic or structural cracks. Has permanent elasticity and excellent resistance to ageing. Indoor-Outdoor. For filling and sealing microcracks, cracks and structural fissures. For sealing joints and as a substitute for glass fiber tapes.
Ready for use plastic putty. Very white, hard and sandable product enabling exceptionally fine finishings. Does not repel joints. Interior. Smoothing of irregular bases, renewal of old bases, repair of scratches, bumps, scratches and surface micro fissures. Capping of wood pores.
T-Rex Gold Power is a one-component, elastic, neutral and high-quality adhesive sealer based on SMX polymer with an extremely high initial adhesion of at least 400 kg / m².
Plaste powder white of last generation for indoor polyvalent jobs, where you need to save time, superior performance and a guaranteed result.
Applicable on any interior support, both absorbent (plaster, plasterboard, cement, concrete, wood, stone, etc.) as difficult or non-absorbent funds (old painted walls, gotele, tile, tile, glass, etc.
Chat with us on WhatsApp
