SEAL AND REFILL UNIVERSAL VERY ELASTIC ANTIMOHO. SOCIAL INTERIOR

€3.18
Tax included

Seal and refill, improves finishes Acid silicone sealant indicated to obtain a perfect sealing, avoiding water, air, and moisture leaks. Seals cracks and holes. European regulation on construction products

size : 280 ml.
Color : Transparent
Quantity
Add to wishlist

Product description

Universal silicone is a one-component, elastic and high-quality sealant based on silicones.

Properties

  • Very easy to apply
  • Does not fade and is resistant to ultraviolet rays
  • Permanently elastic after curing
  • Very good adhesion to many materials
  • Typical acetic smell
  • Weather resistant

Applications

  • Construction and assembly joints.
  • All types of joints and glazing.
  • Union joints.
  • Sealing in the construction of containers and cold rooms.
  • Sealing in air conditioning systems

Dimensions of joints

  • Minimum width of joints: 5 mm
  • Maximum joint width: 30 mm
  • Minimum depth of joints: 5 mm
  • Recommendation for sealing tasks: joint width = 2 × joint depth.

Application Method

  • Method of application: With manual or pneumatic caulking gun.
  • Cleaning: Clean with turpentine or surface cleaner immediately after use.
  • Finishing: With a soapy solution or Soudal's finishing solution before flaying.
  • Repair: With the same material

Observations

  • Do not use it on natural stones, such as marble, granite ... (staining). For these applications, use the silicone for natural stone of Soudal.
  • Due to its acid nature, it can affect certain metals (such as copper or lead).
  • Direct contact with the secondary sealing of the insulating glass units (insulation) and the PVB sheet of the safety glass should be avoided.
  • The total absence of ultraviolet rays can cause the color change of the sealant.
  • In acidic environments or dark rooms, the white silicone may become slightly yellow. Recovers its initial color under the influence of sunlight.
  • When applying the finish with a finishing solution or soap solution, make sure that the solution does not come in contact with the surfaces. If that happens, the sealant will not adhere to that surface. Therefore, we recommend that only the finishing tool be immersed in this solution.
  • We strongly recommend that you do not apply the product under intense sunlight, as it dries very fast.
  • Do not use it on polycarbonate. Instead, use Silirub PC or Silirub AL.
  • Do not use it in applications where its constant immersion in water can occur.
New

You might also like

16 other products in the same category:

Plaste powder white of last generation for indoor polyvalent jobs, where you need to save time, superior performance and a guaranteed result.

Applicable on any interior support, both absorbent (plaster, plasterboard, cement, concrete, wood, stone, etc.) as difficult or non-absorbent funds (old painted walls, gotele, tile, tile, glass, etc.

Cement based hydraulic blender for indoor-outdoor uses. Repairs in wet areas (bathrooms, kitchens...). Fixing sanitation facilities and plumbing. Joints between walls and floors. Flooring and flooring base. Repairs on concrete, brick and stone (never on plaster). Mixed with sand can be used for masonry work. Smooth finish. No removal. White colour

Filling of ceramic joints, terraces and floor tiles. Repair in swimming pools. Specially designed to fill and waterproof joints in floors and walls, ceramics with absorption capacity ≤ 3%, porcelain stoneware, vitreous mosaic, with natural stone platelets. Indicated to work in humid places like bathrooms, kitchens or swimming pools, in occasional or permanent contact with wate

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.