Plaste powder white of last generation for indoor polyvalent jobs, where you need to save time, superior performance and a guaranteed result.
Applicable on any interior support, both absorbent (plaster, plasterboard, cement, concrete, wood, stone, etc.) as difficult or non-absorbent funds (old painted walls, gotele, tile, tile, glass, etc.
DESCRIPTION
Plaste powder white of last generation for indoor polyvalent jobs, where you need to save time, superior performance and a guaranteed result.
Applicable on any interior support, both absorbents (plaster, plasterboard, cement, concrete, wood, stone, ...) and difficult or non-absorbent backgrounds (old painted walls, gotele, tile, glass, glass, etc.)
PROPERTIES
APPLICATION AND PREPARATION OF THE SUPPORT
Apply on clean, healthy, dry supports, free of dust, grease and wax. The supports must be consistent and the old paintings badly adhered removed. Prime highly absorbent substrates with PRIM PLACA or DELTAFIX penetrating primer. The old coatings of lime and mineral paint, remove them mechanically when possible, remove dust and prime with DELTAFIX.
If the surfaces are contaminated with molds, wash them and disinfect them with FUNGISTOP. It is recommended to sand the surfaces very smooth and shiny to obtain a greater adherence. Protect the metal parts with ALL TERRAIN or other anticorrosive primer
Add 1 Kg of powder over 0.45L of water and knead until obtaining a smooth and consistent paste. Of immediate use. Do not remove once the setting has started. This paste can be used for 45 minutes at 20 ° C.
Apply with smooth trowel or stainless steel spatula.
Once dry it can be coated with any type of paint or coating
Clean tools with water immediately after use.
Thinner: Water
White color
Plain tool, serrated or spatula
Cleaning Tool With water, immediately after use
Sanding time / Painted 3 hours, depending on thickness, support and environmental conditions.
Drying Time 3 hours, according to thickness, weight and environmental conditions.
Waiting time to paint or coat 3 hours, depending on thickness, support and environmental conditions.
FAST CEMENT .. Special product for sealing water leaks, repair and sewage joints and emergency work.
Some of its properties:
PREPARED OF ESCAYOLA FOR MOLDINGS. Molding and repair in plaster Moldings, rosettes, soffits and false ceilings. Useful and economic- Filling of cracks and holes. Crafts. INSIDE
Very fine finish and great ease of sanding
Flexible putty in aqueous base reinforced with glass fibre for the filling of dynamic or structural cracks. Has permanent elasticity and excellent resistance to ageing. Indoor-Outdoor. For filling and sealing microcracks, cracks and structural fissures. For sealing joints and as a substitute for glass fiber tapes.
Cement based hydraulic blender for indoor-outdoor uses. Repairs in wet areas (bathrooms, kitchens...). Fixing sanitation facilities and plumbing. Joints between walls and floors. Flooring and flooring base. Repairs on concrete, brick and stone (never on plaster). Mixed with sand can be used for masonry work. Smooth finish. No removal. White colour
Repair and seal joints and cracks Acrylic putty especially suitable for sealing cracks and small holes as well as for sealing joints with movement.. Can be painted with any type of paint
To repair joints and chipped tiles and tiles. Reconstruction of edges and access of swimming pools. Repair anchors stairs or fasten, floors and walls, stoneware. Waterproofing.
High performance cement based adhesive. Applicable on supports made with brick, cement, stone, concrete and fiber-cement. Specially designed to glued tiles on masonry surfaces.
Water-based acrylic filler (acrylic polymers). To be used indoors and outdoors. Its high flexibility absorbs alterations in the wood shape and size up to 20% caused by temperature changes. Because of its high glassfibre content, it has very good mechanical properties. High adhesion. It avoids breakage produced by structural changes
Seal and refill, improves finishes Acid silicone sealant indicated to obtain a perfect sealing, avoiding water, air, and moisture leaks. Seals cracks and holes. European regulation on construction products
Filling of ceramic joints, terraces and floor tiles. Repair in swimming pools. Specially designed to fill and waterproof joints in floors and walls, ceramics with absorption capacity ≤ 3%, porcelain stoneware, vitreous mosaic, with natural stone platelets. Indicated to work in humid places like bathrooms, kitchens or swimming pools, in occasional or permanent contact with wate
PREPARED OF ESCAYOLA FOR MOLDINGS. Molding and repair in plaster Moldings, rosettes, soffits and false ceilings. Useful and economic- Filling of cracks and holes. Crafts. INSIDE
Very fine finish and great ease of sanding
Ready for use plastic putty. Very white, hard and sandable product enabling exceptionally fine finishings. Does not repel joints. Interior. Smoothing of irregular bases, renewal of old bases, repair of scratches, bumps, scratches and surface micro fissures. Capping of wood pores.
Chat with us on WhatsApp
Español
Français
