Flexible putty in aqueous base reinforced with glass fibre for the filling of dynamic or structural cracks. Has permanent elasticity and excellent resistance to ageing. Indoor-Outdoor. For filling and sealing microcracks, cracks and structural fissures. For sealing joints and as a substitute for glass fiber tapes.
Description
Flexible putty in aqueous base reinforced with glass fibre for the filling of dynamic or structural cracks. Has permanent elasticity and excellent resistance to ageing.
Uses
Indoor-Outdoor. For filling and sealing microcracks, cracks and structural fissures. For sealing joints and as a substitute for glass fiber tapes.
Featured Features
Ready-to-use paste formulated with a blend of special polymers and fiber reinforced. Good adhesion sibre wide variety of supports. Excellent elasticity and permanent effect. Totally waterproof. Great hardness.
Main Properties
How to use:
The supports must be firm, dry, clean or free of dust, grease and wax. Apply to trowel, spatula or brush in thin or thick layer, pressing into the cavity, trying not to leave pores and covering the entire width of the palette. Accepts sanding, mashing and later painting. Do not cover with cementitious plasters.
Drying: Total 24 hours (at a thickness of 1 mm)
Painted: from 24 hours
Yield: 1-1,5
Cleaning: Water before drying.
Finish: Thin and flexible.
Ready for use plastic putty. Very white, hard and sandable product enabling exceptionally fine finishings. Does not repel joints. Interior. Smoothing of irregular bases, renewal of old bases, repair of scratches, bumps, scratches and surface micro fissures. Capping of wood pores.
Repair and seal joints and cracks Acrylic putty especially suitable for sealing cracks and small holes as well as for sealing joints with movement.. Can be painted with any type of paint
Seals and fixes cracks and high movement joints Mid-modulus range polyurethane putty with capacity for both sealing cracks and high-movement joints and for fixing all kinds of materials
Set of Stainless Steel Taping Knives, multipurpose.
Recommended use: Multipurpose
Recommended use: For fillers application
For water-soluble plastic paints and temples on facades, walls, interiors, etc. Recommended for all types of surfaces, either smooth or rough (plaster, plaster ceilings, cement, etc.).
For dilution of phosphochromatising paints. Especially indicated for our Shop Primer of the LCP line, as well as for phospho-chromatizing paints.
AMERICAN BRUSH. Ideal for the application of plastic paints, tempers and cellulose glues. Natural wood handle Virola veneer. Standard fiber fiber blunt.
Concentrated mixture of substances. It is used to enhance the preservation of emulsion paint films, especially when they are submitted to conditions which are favourable to mould growth.
Water RHYNOWET SHEETS WHITE LINE INDASA.Ideal for the most delicate work. Plates of 230 x 280mm
Recommended Uses:
Advantages: High Performance
Support: Latex Waterproof Paper C
Seals and fixes cracks and high movement joints Mid-modulus range polyurethane putty with capacity for both sealing cracks and high-movement joints and for fixing all kinds of materials
It is a product for removing most paint stains and marks made by graffiti on several kinds of surfaces: masonry and stone walls, glass objects, metal, urban furniture, some plastics and other materials.
Nature 70 Padded, façades and outdor surfaces. Maximum covering power and 70 mm. diameter for maximum performance and minimum splash.
Recommended use: Façades and outdor surfaces
Hydrocarbon mixture, which has been especially adjusted to allow a large field of application. Slow evaporation thinner.
Water dispersion adhesive especially for wall converings. Laying textile wallcoverings with paper supports, ligh or heacy vinyl paper, natural fibers,...etc, on plaster, concrete, wood and others.
Rectangular Rubber Block, for wood imitation. First apply paint with a brush. In wet paint, use this product to create the wood veins.
Cellulose adhesive intended for the placement of Papers. Presentation in box dust content with performance for 30-50m2
Performance approx. 40 m2
Wire Brush, medium abrasive for stripping, recommended for metals. Suitable to remove rust, paint and adhesions in general. Recommended for small surfaces.
Recommended use: Medium abrasive for stripping, recommended for metals
Pre-accelerated thixotropic orthophthalic polyester resin. It is a highly recommended product for the manufacture, manufacture and repair of parts (can be combined with the use of fiberglass)
(Each unit of 1kg of product carries its catalyst, also included)
Chat with us on WhatsApp
Español
Français
