• -25%
    AGUAPLAST EXPRESS INTERIOR de secado rápido y acabado fino BEISSIER

AGUAPLAST EXPRESS INTERIOR quick drying and fine finish BEISSIER

€30.56
€22.92 Save 25%
Tax included

Plaste powder white of last generation for indoor polyvalent jobs, where you need to save time, superior performance and a guaranteed result.

Applicable on any interior support, both absorbent (plaster, plasterboard, cement, concrete, wood, stone, etc.) as difficult or non-absorbent funds (old painted walls, gotele, tile, tile, glass, etc.

size : 4kg,
Quantity
Add to wishlist

DESCRIPTION

Plaste powder white of last generation for indoor polyvalent jobs, where you need to save time, superior performance and a guaranteed result.

Applicable on any interior support, both absorbents (plaster, plasterboard, cement, concrete, wood, stone, ...) and difficult or non-absorbent backgrounds (old painted walls, gotele, tile, glass, glass, etc.)

PROPERTIES

  • Great filling capacity No retraction, no tension.
  • Very fine finish. Fast hardening
  • Easily sandable and paintable after 3 hours under normal conditions (23 ° C and 65% RH) even in thicknesses up to 1 cm.
  • Extraordinary grip on all types of support.
  • Applicable fresh on fresh.
  • It does not produce color changes.
  • Resistant to shocks in the subsequent coatings.

APPLICATION AND PREPARATION OF THE SUPPORT

  • Support

Apply on clean, healthy, dry supports, free of dust, grease and wax. The supports must be consistent and the old paintings badly adhered removed. Prime highly absorbent substrates with PRIM PLACA or DELTAFIX penetrating primer. The old coatings of lime and mineral paint, remove them mechanically when possible, remove dust and prime with DELTAFIX.

If the surfaces are contaminated with molds, wash them and disinfect them with FUNGISTOP. It is recommended to sand the surfaces very smooth and shiny to obtain a greater adherence. Protect the metal parts with ALL TERRAIN or other anticorrosive primer

  • Application

Add 1 Kg of powder over 0.45L of water and knead until obtaining a smooth and consistent paste. Of immediate use. Do not remove once the setting has started. This paste can be used for 45 minutes at 20 ° C.
Apply with smooth trowel or stainless steel spatula.
Once dry it can be coated with any type of paint or coating
Clean tools with water immediately after use.

Thinner: Water

White color

Plain tool, serrated or spatula

Cleaning Tool With water, immediately after use

Sanding time / Painted 3 hours, depending on thickness, support and environmental conditions.

Drying Time 3 hours, according to thickness, weight and environmental conditions.

Waiting time to paint or coat 3 hours, depending on thickness, support and environmental conditions.

New

You might also like

16 other products in the same category:

Filling of ceramic joints, terraces and floor tiles. Repair in swimming pools. Specially designed to fill and waterproof joints in floors and walls, ceramics with absorption capacity ≤ 3%, porcelain stoneware, vitreous mosaic, with natural stone platelets. Indicated to work in humid places like bathrooms, kitchens or swimming pools, in occasional or permanent contact with wate

Cement based hydraulic blender for indoor-outdoor uses. Repairs in wet areas (bathrooms, kitchens...). Fixing sanitation facilities and plumbing. Joints between walls and floors. Flooring and flooring base. Repairs on concrete, brick and stone (never on plaster). Mixed with sand can be used for masonry work. Smooth finish. No removal. White colour

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.