Español
Français
- -20%
Repair and seal joints and cracks Acrylic putty especially suitable for sealing cracks and small holes as well as for sealing joints with movement.. Can be painted with any type of paint
POLYURETHANE PUTTY FOR INTERIOR AND EXTERIOR. Very elastic and paintable PEGA Y SELLA SOUDAL
€5.87
€4.70
Save 20%
Tax included
Seals and fixes cracks and high movement joints Mid-modulus range polyurethane putty with capacity for both sealing cracks and high-movement joints and for fixing all kinds of materials
Description
Soudal Pega and Sella is a monocomponent, elastic and high quality sealant based on polyurethane.
Properties
- Very easy to apply
- Permanently elastic after curing
- Excellent resistance to ultraviolet radiation
- Very good adhesion to many materials
- Excellent resistance to numerous chemical products
FEATURES
- Indoor
- Outdoor
- Resistant to shock and vibrations
- Resistant to sudden temperature changes
- Perfect for expansion joints
- Always flexible
- Can be painted
- Elastic bonds
- Quick dry
Applications
- Structural bonds in constructions with vibrations.All sealing and bonding applications in the construction sector
- Sealing of joints in contraction of concrete floors.
- Bonding of tiles.
Dimensions of joints
- Minimum gluing width: 2 mm
- Minimum width of joints: 5 mm
- Maximum gluing width: 10 mm
- Maximum joint width: 30 mm
- Minimum depth of joints: 5 mm
- Recommendation for sealing tasks: joint width = 2 × joint depth.
Application Method
- Method of application: With manual or pneumatic caulking gun.
- Cleaning: Clean with turpentine or surface cleaner immediately after use.
- Finishing: With a soapy solution or Soudal's finishing solution before flaying.
- Repair: With the same material
Observations
When painting with oxidative drying paints, there may be disturbances in the drying of the paint (we recommend carrying out a compatibility test before application)
You might also like
T-Rex Gold Power is a one-component, elastic, neutral and high-quality adhesive sealer based on SMX polymer with an extremely high initial adhesion of at least 400 kg / m².
Seal and refill, improves finishes Acid silicone sealant indicated to obtain a perfect sealing, avoiding water, air, and moisture leaks. Seals cracks and holes. European regulation on construction products
16 other products in the same category:
Cement based hydraulic blender for indoor-outdoor uses. Repairs in wet areas (bathrooms, kitchens...). Fixing sanitation facilities and plumbing. Joints between walls and floors. Flooring and flooring base. Repairs on concrete, brick and stone (never on plaster). Mixed with sand can be used for masonry work. Smooth finish. No removal. White colour
Ready for use plastic putty. Very white, hard and sandable product enabling exceptionally fine finishings. Does not repel joints. Interior. Smoothing of irregular bases, renewal of old bases, repair of scratches, bumps, scratches and surface micro fissures. Capping of wood pores.
FAST CEMENT .. Special product for sealing water leaks, repair and sewage joints and emergency work.
Some of its properties:
- Resistant to weathering and humidity. Raincoat
- Does not retract or crack once set.
- High strength and hardness
- etc.
To repair joints and chipped tiles and tiles. Reconstruction of edges and access of swimming pools. Repair anchors stairs or fasten, floors and walls, stoneware. Waterproofing.
High performance cement based adhesive. Applicable on supports made with brick, cement, stone, concrete and fiber-cement. Specially designed to glued tiles on masonry surfaces.
Repair and seal joints and cracks Acrylic putty especially suitable for sealing cracks and small holes as well as for sealing joints with movement.. Can be painted with any type of paint
Water-based acrylic filler (acrylic polymers). To be used indoors and outdoors. Its high flexibility absorbs alterations in the wood shape and size up to 20% caused by temperature changes. Because of its high glassfibre content, it has very good mechanical properties. High adhesion. It avoids breakage produced by structural changes
Imprimacion alto espesor para carrocerias,
PLASTER PLASTER. Filling of holes in interiors. Subjection of materials. It is commonly used in the fastening of boxes and electrical or plumbing materials. For indoor use. Plasterboard repairs.
PREPARED OF ESCAYOLA FOR MOLDINGS. Molding and repair in plaster Moldings, rosettes, soffits and false ceilings. Useful and economic- Filling of cracks and holes. Crafts. INSIDE
Very fine finish and great ease of sanding
Polyester filler. Especially suitable for quick works. Excellent adhesion on metal sheet. High refilling and levelling power. Thixotropic. Easy application in areas that are hard to reach.
To even and refill irregularities of the surfaces to be painted, both metallic or made of polyester. Especially suitable for super- structures.
Chat with us on WhatsApp
