Español
Français
- -40%
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
- FINISH
Coating coating GRANULATED GRANULATED REVETON 7000 SILICONE
€199.83
€119.90
Save 40%
Tax included
Acrylic coating in thick, waterproof and decorative layer of medium granular finish. Excellent protection of the supports in the open. Resistance to atmospheric dirt. High permeability to water vapor. Great aesthetic possibilities and luminosity
- FINISH
REVETON 7000 SILICONE
Acryl-siloxan coating in coarse, impermeable and decorative layer indicated for the Thermal Insulation System Wall-Term. Coarse granular finish.
Description
Friction coating in thick waterproof and decorative layer formed by acrylsiloxanes resins and loads of granulometry studied to obtain a medium granular finish.
Applications
- Rehabilitation of facades with the Thermal Insulation System "WALL-TERM", whose properties are contemplated in DITE nº 402, issued by the Instituto Eduardo Torroja, on new supports or in service of exposed concrete, ceramic brick, blocks of mortar and plasters.
- Protection, decoration and waterproofing of facades.
Properties
- Excellent protection of the supports in the open.
- Resistance to atmospheric dirt.
- High permeability to water vapor.
- Great aesthetic possibilities, luminosity and stability of colors.
- Reinforces the mechanical stability of the system.
- Good handling, ease of use.
- Manual or mechanized application.
- Speed and ease of use (great flexibility of application).
- Very resistant to microorganisms.
- Product in water phase: comfort and safety in the use, with respect to the environment.
How to use
- Preparation of the support
REVETON 7000 SILICONE is applied on all types of supports, concrete, cement mortar, plaster (prior primer) etc ... The plaster should be aristado, masestreado and fine fractasado.
The surface must have a clean surface of dust and grease.
- Application of the product:
A primer coat will be given as a primer (eg SIMILAR LISO), diluted to 30% of the same color as that chosen for the thin layer with REVETON 7000 SILICONE to mask possible glazing.
From the 4-6 hours the second layer with the REVETON 7000 SILICONE will be given by conventional trowel, in a single pass, uniformly regulating the thickness.
To finish the finish, once the product has been extended into a uniform layer, the finishing will be done by a trowel of wood or plastic with circular movement and the striped finish in movement from top to bottom.
For the treatment of large surfaces and to avoid the joints of work, it is advisable to dismantle it in panels of about 15m² / l, which will be done with adhesive tape.
The yield: 2.0 and 2.5 kg / m² according to support
Tools:
- Manual application: stainless steel trowel and fratas
- Machined application: machine gun (6 to 7 mm nozzle)
Cleanliness: Abundant water
Drying: approx. 6-8 hours.
Consolidation: 3 weeks
Average particle size: 1.4 mm
Maximum particle size: 1,8 mm
You might also like
Smooth coating paint for exterior use, based on acrylic copolymers in emulsion. Intermixable colours. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable.
Rough stone coating, highly resistant to alkalinity and atmospheric agents. Protection and decoration of façades in general. Textured coating.High resistance to weathering.. Waterproof. Breathable. It contains antimould preservative. For protecting and waterproofing single-coat mortars. It masks the surface irregularities.
High-quality acrylic facade cladding with maximum waterproofing, covering, adhesion and durability. Waterproof and Breathable. High resistance to weathering, UV rays and ozone.
16 other products in the same category:
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
- FINISH
Pintamax Facades Coating is a paint for exterior and interior with protection of mold and verdin. The quality if the pigments and materials that are used to give color and obtain a long durability in the surfaces to paint, provide a guarantee for 5 years, in its low degradation and permanent quality.
Hormipres AQ is a finishing varnish for concrete and printed concrete floors based on water-based acrylic resin. With a whitish appearance that forms a transparent and shiny film when dry. Use in outdoor and indoor pavements.
Bricogar facades is a paint coating gives the surface to be painted, finished to very good durability. Due to its composition and balance formula, we obtain a breathable surface and a delay in aging facades.
High quality silicate paint, matte finish, especially indicated for the protection and embellishment of facades. It is especially suitable for the protection of mineral surfaces: lime and / or cement plasters, gypsum, brick, concrete, stone, fiber cement, etc., both in new and restorative works such as houses, schools, hospitals, public buildings, monuments.
Rough stone coating, highly resistant to alkalinity and atmospheric agents. Protection and decoration of façades in general. Textured coating.High resistance to weathering.. Waterproof. Breathable. It contains antimould preservative. For protecting and waterproofing single-coat mortars. It masks the surface irregularities.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
- FINISH
Waterproofing super-elastic acrylic coating based on photorefractive pure acrylic copolymers in aqueous dispersion, selected extenders and stable pigments. Especially indicated for the protection and decoration of construction surfaces where cracks up to 1 mm exist or are foreseen
Coating for siloxane-resin based façades that stand up very well to alkalinity and atmospheric agents.. Fully breathable. Completely repaintable. Complies with DIN 18558. ECOLOGICAL. Repels dirt.
Superelastic and waterproof coating formulated with pure acrylic resins, photoreticants in aqueous phase and pigments of complete fastness to the light and the weather. Self-cleaning.
Smooth finish coating. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable
Chat with us on WhatsApp
