Español
Français
- -30%
Smooth finish coating. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable
UPMARKET SMOOTH ACRYLIC COATING 100% ACRYLIC MATTE. REVETON LISO. Totally waterproof, extreme weatherability, Washability
€102.56
€71.79
Save 30%
Tax included
Upmarket smooth acrylic coating 100% acrylic finish matte, highly resistant to atmospheric agents. Totally waterproof ro rainwater. Extreme weatherability and UV resistance. Permeable to water vapour, allowing the support to breathe. Unalterable Colors. Washability.
Description
100% acrylic facade cladding of high range with maximum waterproofing power, covering, adhesion and durability.
Applications
- Protection and decoration of facades made in: concrete, mortar, brick, stone, cement mortar, plastic paint, etc.
- Application as decoration and protection in interior walls in buildings and premises of intensive use.
Properties
- Totally waterproof.
- Excellent adhesion on the usual surfaces in the construction.
- Maximum resistance to the weather, to the U.V. And ozone.
- Breathable, that is, permeable to water vapor.
- Unalterable to the alkalis of the cement (unsaponifiable) and the aggressive industrial environments.
- Unalterable colors.
- Extraordinarily resistant to wet abrasion (washability).
- Wear resistance.
- It complies with the requirements of the Technical Building Code.
- Product with CE marking as a concrete surface protector standard UNE-EN1504-2: 2005.
How to use
- NEW SUPPORT: The surface to be painted should be consistent and clean. Apply the first coat of REVETÓN LAISO diluted with a maximum of 20% of water. From the 4 hours give the second hand with pure smooth REVETON.
- ANTIQUE SUPPORT: The surface to be painted should not have old, poorly adhered paint, grease or efflorescence. In smooth substrates, little absorbent, the surface must be treated previously in order to open the pore and allow the anchoring of the painting. Apply the FLAT REVETÓN as in the previous section.
The approximate yield of the product is 6 m2 / l. In two layers depending on the uniformity and degree of absorption of the support
Tools: Roller, Brush, air or airless spray gun
Cleaning: With water
Drying time:
- To the touch: 2 hours
- Total: 24 hours
- Repainting: from 4 hours
Appearance: Smooth Silky
You might also like
COTEFILM NG is an ultra elastic smooth acrylic coating specially formulated to prevent water seepage from outside. Anti-Fracture (able to seal hairline cracks up to 2 mm). Self-cleaning. Permeable to water vapour, allowing the support to breathe. Impermeable to rainwater.
Smooth coating paint for exterior use, based on acrylic copolymers in emulsion. Intermixable colours. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable.
Smooth solvent-based acrylic coating for pliolite-resin based façades. Exceptional adhesion on all types of construction materials, including wet substrates or in very difficult conditions. Waterproof and completely breathable.
Bicolor 60 Padded, façades and outdor surfaces. Maximum covering power and 60 mm. diameter for maximum performance.
- Maximum covering power.
- 60 mm. diameter for maximum performance.
- Manufactured with internal polyurethane foam for berrer adaptation to irregular surfaces.
- 100% Extra long Polyamide 20 mm.
Recommended use: Façades and outdoor surfaces
Waterproofing super-elastic acrylic coating based on photorefractive pure acrylic copolymers in aqueous dispersion, selected extenders and stable pigments. Especially indicated for the protection and decoration of construction surfaces where cracks up to 1 mm exist or are foreseen
High-quality acrylic facade cladding with maximum waterproofing, covering, adhesion and durability. Waterproof and Breathable. High resistance to weathering, UV rays and ozone.
16 other products in the same category:
High-quality acrylic facade cladding with maximum waterproofing, covering, adhesion and durability. Waterproof and Breathable. High resistance to weathering, UV rays and ozone.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
- FINISH
Pintamax Facades Coating is a paint for exterior and interior with protection of mold and verdin. The quality if the pigments and materials that are used to give color and obtain a long durability in the surfaces to paint, provide a guarantee for 5 years, in its low degradation and permanent quality.
Waterproofing and decorative coating formulated from acrylic copolymers in aqueous solution, inorganic pigments and selected fillers, for exteriors and interiors.
- Outside: Facades, walls and other walls. Patios of lights.
- To the insider: All kinds of vestments to coat and decorate.
Smooth finish coating. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
- FINISH
Rough stone coating, highly resistant to alkalinity and atmospheric agents. Protection and decoration of façades in general. Textured coating.High resistance to weathering.. Waterproof. Breathable. It contains antimould preservative. For protecting and waterproofing single-coat mortars. It masks the surface irregularities.
Superelastic and waterproof coating formulated with pure acrylic resins, photoreticants in aqueous phase and pigments of complete fastness to the light and the weather. Self-cleaning.
Product for removing and cleaning saltpetre and mould growth on masonry and brickwork surfaces.
SMOOTH ACRYLIC COATING FOR PROTECTION AND DECORATION OF FAÇADES
- Outside: facades and other facades. Patios of lights
- Inside: kitchens, bathrooms. Ladder boxes. Public places
Ideal for application on walls and ceilings, and especially for home bathrooms and kitchens
With anti-mold preservative and a great resistance to the weather in addition to being resistant to friction and wear (washable)
Coating for siloxane-resin based façades that stand up very well to alkalinity and atmospheric agents.. Fully breathable. Completely repaintable. Complies with DIN 18558. ECOLOGICAL. Repels dirt.
Smooth solvent-based acrylic coating for pliolite-resin based façades. Exceptional adhesion on all types of construction materials, including wet substrates or in very difficult conditions. Waterproof and completely breathable.
Bricogar facades is a paint coating gives the surface to be painted, finished to very good durability. Due to its composition and balance formula, we obtain a breathable surface and a delay in aging facades.
Chat with us on WhatsApp
