Español
Français
- -30%
Water-based satin paint, especially formulated for concrete swimming pools. Easy appplication and quick drying. The paint film shows a high resistance to algae growth.
WATER-BASED PAINT FOR SWIMMING POOLS. The paint film shows a high resistance to algae growth.ALP
€89.37
€62.56
Save 30%
Tax included
Water-based matt paint, especially formulated for concrete swimming pools. Easy appplication and quick drying. The paint film shows a high resistance to algae growth.
Key Properties
- Excellent quality / price ratio.
- Resistant to bacteria and algae.
- Ease Application.
- Resistant to dilute acids and alkalis.
- Repintable On solvent based acrylic paints.
Recommended uses
Application on walls and pavement POOLS cement or concrete.
Performance: 12-14 m² / Lt per coat (Approximate)
Layers: Two layers.
Useful: Brush / roller.
Surface treatment
- New Surfaces:The new media should not be painted before 28 days, in order that the concrete is completely set. Then do an acid washsurface with hydrochloric acid (Salfuman) diluted 10% with water. Then rinse with abundant water to remove carbonates and aggregates loosely adhered to the dough, and allowed to dry thoroughly for a minimum of 48 hours. The first coat should be applied diluted to 10% with our thinner quick-drying, so that penetrate deep into the bracket. After 24 hours, apply a second coat as presented in the package.
- Old surfaces:Must clean and degrease the surface. In pools already painted, they should be removed defective areas of painting and sand the parts which cling, trying not to place undue layer thereon. Recoatable with itself and solvent based acrylic paints. About we recommend acrylic water, carry out a test of adherence.
GENERAL REMARKS:
- Carefully stir the contents in the pack.
- The surfaces to be painted have to be clean and dry, and concrete thoroughly cured.
- Await 7 - 14 days after painting to fill the swimming pool.
- When old paint coats are water-based, repainting must not be made with other paints based on chlorinated-rubber or on strong solvents.
You might also like
Nature 70 Padded, façades and outdor surfaces. Maximum covering power and 70 mm. diameter for maximum performance and minimum splash.
- Maximum covering power.
- 70 mm. diameter for maximum performance and minimum splash.
- Manufactured with internal polyurethane foam for better adaptation to irregular surfaces.
- 100% Extra long Polyamide 20 mm.
Recommended use: Façades and outdor surfaces
Bicolor 60 Padded, façades and outdor surfaces. Maximum covering power and 60 mm. diameter for maximum performance.
- Maximum covering power.
- 60 mm. diameter for maximum performance.
- Manufactured with internal polyurethane foam for berrer adaptation to irregular surfaces.
- 100% Extra long Polyamide 20 mm.
Recommended use: Façades and outdoor surfaces
Pre-accelerated thixotropic orthophthalic polyester resin. It is a highly recommended product for the manufacture, manufacture and repair of parts (can be combined with the use of fiberglass)
(Each unit of 1kg of product carries its catalyst, also included)
To repair joints and chipped tiles and tiles. Reconstruction of edges and access of swimming pools. Repair anchors stairs or fasten, floors and walls, stoneware. Waterproofing.
Filling of ceramic joints, terraces and floor tiles. Repair in swimming pools. Specially designed to fill and waterproof joints in floors and walls, ceramics with absorption capacity ≤ 3%, porcelain stoneware, vitreous mosaic, with natural stone platelets. Indicated to work in humid places like bathrooms, kitchens or swimming pools, in occasional or permanent contact with wate
Specially formulated solvent for chlorocaucho paints and signaling
6 other products in the same category:
Water-based satin paint, especially formulated for concrete swimming pools. Easy appplication and quick drying. The paint film shows a high resistance to algae growth.
Water-based matt paint, especially formulated for concrete swimming pools. Easy appplication and quick drying. The paint film shows a high resistance to algae growth.
High performance cement based adhesive. Applicable on supports made with brick, cement, stone, concrete and fiber-cement. Specially designed to glued tiles on masonry surfaces.
To repair joints and chipped tiles and tiles. Reconstruction of edges and access of swimming pools. Repair anchors stairs or fasten, floors and walls, stoneware. Waterproofing.
Filling of ceramic joints, terraces and floor tiles. Repair in swimming pools. Specially designed to fill and waterproof joints in floors and walls, ceramics with absorption capacity ≤ 3%, porcelain stoneware, vitreous mosaic, with natural stone platelets. Indicated to work in humid places like bathrooms, kitchens or swimming pools, in occasional or permanent contact with wate
Chat with us on WhatsApp
