Description
Waterproof protective cover for wood, to be used against bleaching fungi or bluish. Basidiomycete fungi, termites and woodworms. Penetrates easily into wood. It is a moisture regulator and provides a preparation for subsequent treatment with varnishes and finishing protectors.
Main Properties
- Impregnant.
- Avoid wormwood and termites.
- Prevents the appearance of fungi.
Recommended:
Interior Exterior
Use only in wood to be used indoors or under cover with risk of wetting, or wood used outdoors where you may be exposed to moisture, but not coming in contact with the soil, or with fresh or salt water.
Unpainted surfaces:
- New woods: Sand the wood in the direction of the grain with fine grit sandpaper and thoroughly clean. Must be free of dust, clean and dry
- Varnished wood: Remove layers of old varnish until reaching the wood, stripping and / or sanding in the direction of the grain. All finishes should be completely removed. If the wood is gray or deteriorated, it should be sanded to a clean and solid surface. The wood must be protected against frost during treatment. Do not apply in humid environments or if rain is imminent.
The product should be applied evenly, in order to obtain better results.
Resin or tropical woods and other surfaces, consult technical service.
Number of layers: 2 or more hands.
Maximum application rate: 190-200 ml / m² (191-201 g / m²).
Application tools: Brush
Dilution: Product ready for use. Do not dilute
Cleaning: Water.
Repainting: The repainting of this product is possible with most solvent based product and water. However in products of our competence, we recommend a previous test.