• -30%

VERNISH MARINE GLOSS. RESISTANT TO THE OUTDOORS, ELASTIC AND FINISH WITH BALANCED HARDNESS. TOLLENS

€31.08
€21.76 Save 30%
Tax included

Varnish marine and high quality based on alkyd resins modified with urethanes. Resistant to the wood expanding and contracting. Finish with balanced hardness and elasticity and elastic. Resistant to the outdoors

Suitable for protection and decoracion de of surfaces on boats, wooden buildings near the sea, indoors and outdoors.

size : 750ml.
Color : incoloro
Color: incoloro
Quantity
Add to wishlist

Description

Varnish marine and high quality based on alkyd resins modified with urethanes.

Applications

Suitable for protection and decoracion de of surfaces on boats, wooden buildings near the sea, indoors and outdoors.

For wooden elements in coastal areas or near rivers or very wet areas, boats.

Suitable for finish and decoracion de of wooden surfaces outdoors, doors, windows and wooden facings...

Properties

  • Easy to apply and spread, with good penetration into the wood.
  • Filling power
  • Resistant to the wood expanding and contracting
  • Finish with balanced hardness and elasticity and elastic
  • Resistant to the outdoors
  • With alkyd resins
  • Contains UV filter
  • Resistance to moisture, sun and saltpetre
  • High brightness

PREPARING THE SUPPORT
 
The wood must be free of salt, clean and dry (with less than 15% moisture). Apply previously Tollens Xilodex Protective Fund for effective protection against insects and fungi (do not apply on tropical or excessively resinous woods).

  • New woods: Sand the wood in the direction of the grain with fine grit sandpaper and clean. Remove resins with white spirit.
  • Varnished woods: Remove remnants of loose and chipped varnish by stripping and / or sanding in the direction of the grain. If you want to highlight the vein, remove the layers of old varnish until you reach the wood.
  • Resin or tropical woods and other surfaces, consult technical service.

Yield: 14-16 m² / Lt (approximate and according to support).

Drying: (according to color, applied thickness and ambient temperature) Total: 7-9 hours.

Repainting: 24 hours.

Application tools: Brush, gun, roller.

Dilution: Product ready for use. For spray gun it should be diluted to a maximum of 15% with synthetic solvent until adequate viscosity

New

You might also like

It is the ideal treatment for the comprehensive protection of wood. Water-repellent, quick-drying, high resistance to weathering and sun ray damage. It contains UV filters. Transparent colours that do not mask the wood natural appearance. Breathable and microproous. It allows the passage of water vapour between the inside and outside of the wood and protect it from flaking and cracking.

16 other products in the same category:

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.