Description
Water-based primer, made from acrylic copolymers and selected pigments.
Main Properties
- Water base
- Fast dry
- Easy sanding
- Special porous surfaces.
- Excellent coverage.
- Repaintable with any type of paint finish customary to water and with solvent enamels.
- Indoor - Outdoor
Applications
Porous masonry surfaces in general. Especially for plaster and wood
PREPARING THE SUPPORT
The surface to be painted must be dry and clean, without old paint badly adhered, no loose particles, dust, grease, oil, wax, grease, etc.
- If the surface is very porous, it is necessary to apply 2 hands of product with a minimum of 4 hours of interval.
- Surfaces already painted or old, in good condition wash or brush beforehand to remove paint residue and to sand defective areas. In bad condition, remove the paint completely to later apply the primer primer Tollens.
- Defective and cracked surfaces, in addition to the above considerations, the affected areas must be filled and leveled with the most suitable product in the putty line. Allow to dry, level the surface with a sandpaper and remove the dust with a damp cloth.
Yield: 10-12m² / l
Drying: 2.5 Hours
Repainting: 4Hours
Tools: Brush, Roller or Pistol
Dilution: Ready-to-use product, in case of airless spray, dilute with water to suitable viscosity.
Cleaning: Water