PROPERTY: PROTECTION and high resistance to corrosion, water and humidity
PROPERTIES:
Ideal for application on surfaces of iron that will not rust or iron and Rusty type cut and other ferrous alloys, fixing rust and preventing rust stain more and not allowing the ingress of moisture and oxygen, also on metal surfaces Product enameled synthetic in any color who have lost their brightness, color and clarity initial leaving as new and as an additive to synthetic type or alkyd enamels, and as background to eliminate synthetic paints and glazes. Do not apply 2 component products, chlorinated rubber, etc.
HOW TO USE: Ensure that the foundations are properly treat dry cleaner acid residues accelerated oxidation, calamine, dirt, dirt, etc. You can reduce to no more than 20% pure white spirit or turpentine. Give the well-spread and distributed layers.
Apply directly on the surface to protect and clean and dry. Enameled surfaces with little pore abroad is not recommended because of a shorter duration.
It is recommended that a small test before to check finishing processes and results, because depending on the type of surface finish may be different.
PERFORMANCE: |
With 1 liters Approximately 15 m2 |
---|
FINISH: |
Satin |
---|
USE: |
Interior and Exterior |
---|
DRYING: |
4-8 hours (depending on temperature and humidity) |
---|
CLEANING TOOLS
And SOLUTION turpentine or white spirit
The information provided in this sheet is the result of our laboratory research and practical experience of application. However and because often the products are used in conditions beyond our control, we can not guarantee anything but the success of the product as long as their application and use are correct.