• On sale!
  • -30%
    HEAT RESISTANT PAINT BLACK high temperatures up to 350ºC ALP

HEAT RESISTANT PAINT BLACK high temperatures up to 350ºC ALP

€18.09
€12.66 Save 30%
Tax included

It is a coating based on a modified silicone resin and with pigments of a high thermal resistance. It stands high temperatures without losing its original appearance and protection performance. As a protection of iron and steel elements submitted to high temperatures. Suitable for boilers, chimneys and in general for all those elements that are continuously exposed to high temperatures up to 350ºC

size : 250ML
Color : Aluminio Plata
Quantity
Add to wishlist

Description
Black satin enamel resistant to high temperatures (up to 350 ºC).

Main Properties

  • Easy application, good brochabilidad and leveling.
  • Excellent hardness and flexibility.
  • Single layer.
  • Protects against high temperatures in all types of ferrous materials
  • Resists 350ºC

Recommended Uses

Indoors and outdoors on ferrous metals, steel plates, pipes, wrought iron, fireplaces, etc.

Surface treatment
 
Surfaces should always be healthy, clean, dry, free of grease, dust, rust and other contaminants.

  • New surfaces: They must be prepared with the appropriate primer to the type of support used.
  • Painted surfaces in poor condition: In addition to the above considerations, the surface must be free of poorly adhered paint. Sanitize defective areas and proceed as on a new surface.

Yield: 14-16 m² / Lts

Interior Exterior

Quick Drying: 1H

Repainting: If necessary, recoat before 8 hours or after 7 days.

Number of layers: One, at a thickness of 25 - 30 microns dry.

Tools: Brush / Roller / Pistol.

Dilution:

  • For brush or roller: Product ready to use. Dilute to a maximum of 5% with Solvent
  • For spray gun dilute up to a maximum of 15% with Solvent until adequate viscosity.

Cleaning: Clean utensils with Solvent

New

You might also like

Phosphocromatising and passivating vinyl primer with a single component for industrial use.

Especially suitable for the application of both ferrous metal surfaces and different non-ferrous alloys (galvanized, aluminum, zinc-plated ...), which present adhesion problems. As pre-treatment of blasting steel allowing different finishes (alkyd, Polyurethanes, Epoxy.)

16 other products in the same category:

Quick drying rustproof enamel-paint. Direct application on steel, no primer is needed. It provides up 10 years weathering resistance and a high gloss finish. High adhesion. Hardwearing. Resistant to impact and scratches.

The use of Smooth OXIRON allows saving time because overcoating is possible after one hour and, in this way, most paint works can be finished in one single day.

Alkyd enamel with a glossy finish and anticorrosive effect. Excellent levelling, brushability and coverage. Suitable for the protection of metal surfaces that require good resistance (doors, windows, railings, fences, wainscoting, pipes, furniture, industrial vehicles, wooden boats and tanks). Good gloss and colour retention.

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.