Description

Elastic pasty tail for use to bond floor coverings.

Characteristics

• Great grip power
• Elastic
• Easy application
• Long open work time.
  

Applications

Gluing of all types of floor coverings: fixed carpets (with or without foam backing), linoleum, vinyl and PVC floors. It is a water base product, so it is recommended that one of the supports be porous (cement, concrete, stone, wood, etc.).

Specifications

• Base: (styrene) acrylate
• Consistency: Pasta
• Curing system: Physical drying
• Open time: Max. 30 min
• Consumption (*): Approx. 400-600 g / m²: depending on the substrate and pallet used
• Temperature: application: 5 ° C → 30
• Drying time (at 20 ° C and 60% relative humidity): Ca. 12 hours
  

Substrates

• Substrates: porous substrates such as concrete and wood
• Nature: Adhesive of floor coverings 26A must be applied on a rigid surface, clean, permanently dry and free of dust or grease, which does not contain any loose parts or paint, wax, oil or other contaminants. Irregularities, such as remaining concrete leveling or previous adhesives, can impair adhesion. It is preferable to remove them by mechanical means, for example, by sanding or sand spraying.
• Surface preparation: No pre-treatment required. We recommend performing a preliminary compatibility test
  

Application Method

• Method of application: Apply the glue to the surface with a palette (B1 for vinyl / PVC and B2 for carpet with jute or synthetic support). Do not apply more glue to the surface than what can be covered in 20 to 30 minutes.
• Cleaning: Before curing, Adhesive 26A floor coatings can be removed with water from substrates and tools. The cured floor coat adhesive 26A can only be removed by mechanical means.
  
• Repair: With the same material