Español
Français
High performance cement based adhesive. Applicable on supports made with brick, cement, stone, concrete and fiber-cement. Specially designed to glued tiles on masonry surfaces.
SUPER FAST WOODEN TAIL. DRYING IN 20 MINUTES FOR INTERIORS 64 A SOUDAL
€2.24
Tax included
64A wood glue is a ready to use dispersion glue characterized by ultra-fast drying. Quick drying in 20 minutes, and transparent finish. Once dry, resistant to water. For paper glueing, carpentry, wood, fiberboard, agglomerate, veneer applications; and stuck in assembly of soft woods.
Description
The 64A wood glue is a ready-to-use dispersion glue characterized by an ultra-fast drying.
Characteristics
- Fast drying (20 minutes) and great bonding strength.
- Transparent once dry and water resistance D2.
- Open time: approx 5 minutes
- Pressure time: 60 minutes.
- Available in 125 gr, 250 gr and 750 gr.
Properties:
- Easy application
- Transparent drying
- Very strong glue
- Ultra-fast drying
Uses and applications:
- Gluing of carpentry
- Gluing paper
- Gluing of wood, fiberboard, chipboard, plating
- Bonding-assembly of softwood-Gluing in the lumber industry (eg foil, dovetails)
Substrates:
- It is applied to wood, cardboard, various porous substrates.
- Substrates must be dry and free of dust, grease and any other substance that prevents adhesion.
- Pretreatment: sanding the substrates a little better the adhesion.
- It is advisable to make an adhesion test on each substrate.
Application:
- Method of application: apply the glue with opeine brush for glue with fine teeth, join the materials and press for 20 minutes.
- Application temperature: + 5 ° C to + 30 ° C
- Cleaner: water
- Repair: with tail for wood 64A
Open time: 15 min.
Press time: 20 min.
Press force: 1-2kg / cm²
Consumption: Ca. 150mL / m²
16 other products in the same category:
Linea Industria is modified quick-drying alkud antioxidant primer for metal structures, machinery and, in general, to primer iron surfaces that require protection in medium aggresive environmeents and its application is interior - exterior. It is always recommended to give a acabado paint.
Seals and fixes cracks and high movement joints Mid-modulus range polyurethane putty with capacity for both sealing cracks and high-movement joints and for fixing all kinds of materials
Polishing Paste for Wood, Automotive, Naval or other similar markets. Dry use.
Cement based hydraulic blender for indoor-outdoor uses. Repairs in wet areas (bathrooms, kitchens...). Fixing sanitation facilities and plumbing. Joints between walls and floors. Flooring and flooring base. Repairs on concrete, brick and stone (never on plaster). Mixed with sand can be used for masonry work. Smooth finish. No removal. White colour
Converter of oxide of a single layer.It does not allow the advance of I oxidize.It can be repainted with completed solvent type(Alkyd,chlorine rubber, epoxy and polyurethane) it is used on rusty surfaces difficult to carry out a severe cleaning of surface.
Gilmalux Antioxidant Forge is an anti-corrosion metallix paint with micaceous iron oxide, of forged finish that is applied directly to the iron without the need of a pre-primer.
Its thixotropic appearance gives it an easy application, which prevents picking and splashing, presenting an excellent finish.
Friction coating in thick waterproof and decorative layer formed by acrylic resins and loads of granulometry studied to obtain a finish scratched to friction.
- FINISH
Seal and refill, improves finishes Acid silicone sealant indicated to obtain a perfect sealing, avoiding water, air, and moisture leaks. Seals cracks and holes. European regulation on construction products
Water-based antirust varnish with forged finish, for direct application on metals, without need for primer. High resistance to rust, humidity and water, as well as excellent adherence on different surfaces. While preventing the appearance of rust, they favour the creation of a protective coating on the metal, which neutralises the formation of iron oxide
Chat with us on WhatsApp
