Main Properties
- Resistant to abrasion.
- With polyurethane and waxes.
- Repeat the water. Waterproof.
Applications
Inside. For the varnishing of wood or cork floors, stairs, bar bars and where high abrasion resistance is required indoors
PREPARING THE SUPPORT
The wood should be free of waxes, clean and dry (with less than 15% moisture).
- New woods: Sand the wood in the direction of the grain with fine grit sandpaper and clean. We recommend sealing the pore with Tapaporos to the water.
- Varnished woods: In good condition, sand and remove the resulting dust. Pre-check the compatibility of this product with the old varnish. In a bad condition, remove traces of previous varnish stabbing the surface.
- Resin or tropical woods and other surfaces, consult technical service.
HOW TO USE
Remove the product with a spatula. Product ready for use. Apply two to three layers to the desired finish, sanding between layers once dry and eliminating the resulting dust. No more than 24 hours between layer and layer. Put into service in 48h.
CERTIFICATES:
- Certification Euroclasses of reaction to the fire in category C s3 d0. Products that comply with Euroclases regulations have a good fire resistance.
- Certification No Toxicity (UNE-EN 71-3): Certifies that the paint contains no toxic substances.
Yield: 10-14 m² / Lt (approximate and according to stand).
Drying: (according to color, applied thickness and ambient temperature)
- Total: 1 hours.
- Repainting: 4 hours.
Number of layers: 2 or 3 layers depending on the porosity of the support and the application
Application tools: Brush, gun, roller.
Dilution:
- Product ready for use.
- For spray gun must be diluted maximum 15% with water to achieve the proper viscosity.
Cleaning: Water.