Description

Varnish with alkyd resins of polyurethane that provides a great resistance to blows, scratches, water, stains and a great elasticity. Finishing that highlights the grain of the wood.

Main Properties

• Indoor / Outdoor covered.
• Varnish with polyurethane alkyd resins
• Excellent resistance to shocks, scratches, water, stains.
• High elasticity (Flexible)
• High brightness
  

How to use:

Remove the product beforehand. Product to use. Apply two layers of varnish, sanding between layers once dry and eliminating the resulting dust.

PREPARING THE SUPPORT
 
The wood must be free of waxes, clean and dry (with less than 15% moisture). Apply previously Protective Fund for an effective protection against insects and fungi. Do not apply on tropical or excessively resinous wood since it can affect the drying of the product

• New woods: Sand the wood in the direction of the grain with fine grit sandpaper and clean. Remove resins with white spirit.
• Varnished woods: Remove remnants of loose and chipped varnish by stripping and / or sanding in the direction of the grain. If you want to highlight the vein, remove the layers of old varnish until you reach the wood.
• Resin or tropical woods and other surfaces, consult technical service.
  

Applications

For woods on walls and ceilings, furniture, objects, doors and windows indoors and outdoors under roof.

Yield: 14-16m² / l

Drying: 5-6 hours

Repainting: 12-24 hours

Tools: Brush, roller or pistol

Certified Euroclass Fire Resistance (B-s1, d0)

Number of layers: 2 layers The color of the surface and type of wood conditions the final color obtained. With each hand, the color darkens.

Dilution: Ready-to-use product. For spray gun must be diluted to a maximum of 15% with solvent until adequate viscosity is obtained.

Cleaning: Synthetic solvent.