• -30%
    IMPRIMACIÓN ANTIOXIDANTE

PRESSURE DRY ANTIOXIDANT PRIMER WITH ACTIVE ZINC PIGMENTS Direct on iron and oxide

€137.25
€96.08 Save 30%
Tax included

Antioxidant quick drying primer applied as additional protection to enamel on iron surfaces subjected to extreme climatic conditions, such as coastal areas of sea, high mountains and highly oxidized surfaces. For doors, street lamps, bars, railings, furniture and any iron element in exterior or interior.

size : 4L.
Color : White
Quantity
Add to wishlist

Description

Antioxidant quick drying primer applied as additional protection to enamel on iron surfaces subjected to extreme climatic conditions, such as sea areas, high mountains and highly oxidized surfaces.


MAIN PROPERTIES

  • Excellent corrosion protection: with active zinc anti-corrosion pigments that block the formation of oxide
  • Excellent adhesion


APPLICATIONS

For doors, street lamps, bars, railings, furniture and any iron element in exterior or interior.


PREPARING THE SUPPORT

Surfaces must always be clean, dry and free of grease, dust and loose rust. Always remove loose rust by blasting, manual or mechanical brushing and degreasing with solvent.

  • New iron and steel surfaces: Remove grease and dirt with solvent and dry preferably with absorbent paper.
  • Surfaces already painted: If it is badly adhered, remove the paint with sandpaper and clean the resulting dust.
  • If the paint is in good condition, sand lightly.



Yield: 10-12 m² / Lt (approximate and according to support).

Drying: (according to color, applied thickness and ambient temperature)

  • Total: 3 hours
  • Repainting: 12 hours.


Number of layers: Apply one hand. Cover corners, edges and welding areas well.

Application tools: Airbrush, roller or spray gun / air-less. For spray gun use 1.2-1.5 mm nozzle

Dilution:

  • Product ready for use, dilute at most 5% with Solvent
  • For spray gun, 10-15% Solvent X (Synthetic Quick Dry) should be diluted to a suitable viscosity.


Cleaning: Solvent

New

You might also like

Minis Antidrop Super, Small flat surface with water-based paints. Rounded end allowing corner painting and avoiding marks. Manufactured by thermofusion to avoid sewing points.

  • Maximum covering power.
  • Rounded end allowing corner painting and avoiding marks.
  • Manufactured by thermofusion to avoid sewing points.

13 other products in the same category:

Phosphocromatising and passivating vinyl primer with a single component for industrial use.

Especially suitable for the application of both ferrous metal surfaces and different non-ferrous alloys (galvanized, aluminum, zinc-plated ...), which present adhesion problems. As pre-treatment of blasting steel allowing different finishes (alkyd, Polyurethanes, Epoxy.)

Product with a high solid content with excellent adhesive power on all metallic substrates such as steel, aluminium and materials, such as plastic, wood, cardboard etc. Use the product to fill small holes, streaks, scratches, dents, cracks etc. on the surfaces that later must be sanded and painted. It features a high coverage, resistance to ageing and to corrosion

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.