PROPERTIES:
Once applied gives a tonality of its natural color of natural origin (wet effect) that always lasts, is not stained with food spills, oils, drinks, mud, grease and other garbage. Water-repellent surface. It is resistant to footprints, rubbing, washing and all kinds of uses, does not scale and on the floors does not need maintenance after carrying the incorporated waxes.
Maximum resistance to the interior, for greater resistance to the exterior use MORAKRON INTEMPERIE
BRUSH-RUSTIC: In case of placement with mortar, before applying let the work dry 30 days in summer and 60 in winter minimum. In case of cement-tail will take 4 or 5 days, Clean
After cleaning with the CLEANER or remove cements and rinse with water, let dry 15 days in summer and 30 in winter before application.
Floors with high absorption:
- (Manuals) apply the 1st layer ABUNDANT to brush and well distributed and allow to dry 24 hours, apply one layer every 24 hours until well covered (approx 3 - 4 layers, according to pavement) total yield approx. 1 liter for 3 M2.
- Low absorbent (smooth) flooring, aged marble, stone, Slate: apply a brush coat and well distributed every 24 hours (depending on absorption) until well covered, once covered do not apply more layers
- Hydraulic mosaic: Apply the very extended layers and especially the last of wrist or sponge finish very extended. Total yield approx. 1 liter for 7-10 M2.
On floors without absorption type Gres, rasilla, etc .: DO NOT RECOMMEND.
Important: before applying to avoid soil moisture and dirt, at 2 days you can tread very carefully at 6 days normal and at 20 days all use. Allow to dry with good ventilation.
It does not need maintenance products, after the years and finds deterioration another layer can be applied without need of pickling.
Where other unknown products were applied open than pickling.
RESTORATION AND MAINTENANCE:
Over the years if there has been deterioration or wear and tear for a lot of use, it will not be necessary to pickle, just clean with water and detergent to remove grease or dirt. To the outside clean with brushes metal or steel esparto slightly and sweep. Apply a first layer and 24 hours later a 2nd layer to be well covered. On surfaces that have been applied other products will have to be stripped.
In case of a bad application for not attending our forms of application we avoid all type of guarantee.
Total PERFORMANCE: 1 liter for 3 m2. In manual mud floors, 5 m2 in mechanical mud floors, 7-10 m2 aged marble slate etc ...
Cleaning Useful: Turpentine