Matt acrylic plastic paint for professionals. For interior on all types of construction materials such as plaster, cement, plaster, concrete or brick.
Suitable for outdoor use in white and light colors. Good washability, Good covering, Mold resistant, Permeable to water vapor, breathable, Resistant to U.V., does not yellow.
DESCRIPTION
Matt acrylic plastic paint for professionals looking for ease of application.
APPLICATIONS
PROPERTIES
CERTIFICATIONS AND TESTS
THEORETICAL PERFORMANCE: 8 - 12 m² / L / hand
DRYING: 1 - 2 hours
REPAINTED: 12 hours.
PREPARATION OF SURFACES
After application, we must make sure that the support has been properly cleaned, eliminating all traces of contaminants, grease, efflorescence, biodeterioration and all those substances that may impair the penetration or adhesion of the primer or paint on the substrate.
The support must be cohesive. If necessary, prime with the most suitable product and / or equalize absorptions from the support. If there are traces of badly adhering paint, it should be removed.
Fill and level the defective areas with the most suitable product of the BASIKOS MASILLAS line.
The success of the application depends to a large extent on a good diagnosis and good preparation of the support. We suggest consulting the attached documents that REVETÓN has made detailing each of these phases prior to the application of the protection and painting system.
NUMBER OF LAYERS: Two. Depending on the porosity of the support, depending on the background color on which it is painted and for certain intense colors it may be necessary to apply an additional layer.
TOOLS: Brush / Roller short hair - medium / Gun / Airless.
PRIMING
If necessary, prime with COTEFILM AQUEOUS PRIMER or with the most suitable product from the TOLLENS PRIMER line (IMMEDIATE FIXING TO WATER, UNIVERSAL PRINTING) to improve adhesion and / or equalize absorptions of the substrate, especially when applying intense colors.
Surfaces with moisture stains, grease, smoke: Apply a layer of the products indicated in the ALP lines
PRODUCT APPLICATION
DILUTION
CLEANING
Clean utensils with water immediately after use.
NOTE: The cleaning of stains in intense colors should be done with a damp sponge and rubbing gently to minimize the appearance of brightness.
Matt ENVIRONMENTALLY-FRIENDLY emulsion paint. For indoor walls and ceilings. High covering. Non drip. Non splatter. Excellent performance,is washable and very easy to implement.
Smooth finish coating. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable
Indoor-Outdoor washable acrylic matt. Strong whiteness and easy to apply. DEspecially suitable for painting walls and ceilings, both indoors and outdoors, where high quality finishes are required. Breathable. It does not alter permeability and therefore, it allows water vapour going through the surface. Snow white. Good coverage
Acrylic matte acrylic paint for professional use in areas with the possibility of mold. Good yield, adhesion, whiteness, yield, resistance to washing and application.
Mate-quality plastic odrless,environmentally friendly,allowing paint and sleep in the bedrooms. Excellent performance,is washable and very easy to implement. Certificate EU ECOLABEL
Professional Sanding Block, to poolish wood, paint... Semi flexible foam inside and can be used both wet and dry.
Recommended use: To polish wood, metal plastic, walls...
Pressed Round Brush, for acrylic latex paint. Economical professional brush and wooden handle.
Recommended use: For acrylic latex paint
Matte-finish water-based plastic paint formulated with emulsion copolymers with good opacity and very good yield. Especially suitable for decoration in interior vertical walls.
Universal tinting colours for paints. High concentration and compatibility. To tint synthetic and greasy paints and varnishes, as well as coatings made out of chlorinated rubber... It is also suitable for water-emulsion, size and distemper paints. Moreover, it can tint non-structural concrete.
High-resistance silky matt plastic paint for interior, repels stains, resists scuffing, highly washable. Especially indicated for interior spaces where greater resistance to stains and frequent washing, rubbing and glittering are required, such as for example living rooms, dining rooms, corridors.
Acrylic matte acrylic paint for professional use in areas with the possibility of mold. Good yield, adhesion, whiteness, yield, resistance to washing and application.
Water-based acrylic paint resistant to the most common household stains, super washable and able to withstand rubbing without leaving halos and shiny surfaces.
Interior spaces where a product that combines ease of application, extraordinary resistance to everyday use and a high quality finish is required.
SMOOTH ACRYLIC COATING FOR PROTECTION AND DECORATION OF FAÇADES
Ideal for application on walls and ceilings, and especially for home bathrooms and kitchens
With anti-mold preservative and a great resistance to the weather in addition to being resistant to friction and wear (washable)
Matt acrylic plastic paint for professionals. For interior on all types of construction materials such as plaster, cement, plaster, concrete or brick.
Suitable for outdoor use in white and light colors. Good washability, Good covering, Mold resistant, Permeable to water vapor, breathable, Resistant to U.V., does not yellow.
Indoor and outdoor satin emulsion paint. Permanent white. High covering. Waterproof, breathable and wash resistant. Good resistance to weathering and alkalis. It contains anti mould preservative. Non-yellowing.
Especially suitable to protect and decorate surfaces, where a high level of resistance to dirt and washes is required.
Chat with us on WhatsApp
Español
Français
