DESCRIPTION
Matt acrylic plastic paint for professionals looking for ease of application.
APPLICATIONS
- For interior on all types of construction materials such as plaster, cement, plaster, concrete or brick.
- Suitable for outdoor use in white and light colors
PROPERTIES
- Good washability
- Good cover
- Easy to apply
- Resistant to mold.
- Permeable to water vapor, breathable.
- Resistant to U.V., does not yellow.
- Good adhesion on the usual construction materials
CERTIFICATIONS AND TESTS
- Good washability: UNE-EN ISO 11998 Class 2
- Cover: ISO 6504-3 in Class 3
THEORETICAL PERFORMANCE: 8 - 12 m² / L / hand
DRYING: 1 - 2 hours
REPAINTED: 12 hours.
PREPARATION OF SURFACES
After application, we must make sure that the support has been properly cleaned, eliminating all traces of contaminants, grease, efflorescence, biodeterioration and all those substances that may impair the penetration or adhesion of the primer or paint on the substrate.
The support must be cohesive. If necessary, prime with the most suitable product and / or equalize absorptions from the support. If there are traces of badly adhering paint, it should be removed.
Fill and level the defective areas with the most suitable product of the BASIKOS MASILLAS line.
The success of the application depends to a large extent on a good diagnosis and good preparation of the support. We suggest consulting the attached documents that REVETÓN has made detailing each of these phases prior to the application of the protection and painting system.
NUMBER OF LAYERS: Two. Depending on the porosity of the support, depending on the background color on which it is painted and for certain intense colors it may be necessary to apply an additional layer.
TOOLS: Brush / Roller short hair - medium / Gun / Airless.
PRIMING
If necessary, prime with COTEFILM AQUEOUS PRIMER or with the most suitable product from the TOLLENS PRIMER line (IMMEDIATE FIXING TO WATER, UNIVERSAL PRINTING) to improve adhesion and / or equalize absorptions of the substrate, especially when applying intense colors.
Surfaces with moisture stains, grease, smoke: Apply a layer of the products indicated in the ALP lines
PRODUCT APPLICATION
- Properly homogenize the product after application.
- Do not apply on hot surfaces or with strong wind.
- Apply the finish after the indicated overcoat time of the primer.
DILUTION
- Dilution: For brush or roller, if necessary, dilute in all hands to 5%.
- For gun dilute to proper viscosity
CLEANING
Clean utensils with water immediately after use.
NOTE: The cleaning of stains in intense colors should be done with a damp sponge and rubbing gently to minimize the appearance of brightness.