Main Properties   

• Perfect adhesion on cement, concrete and asphalt.
• High wear resistance
• Good resistance to bleeding.
• Due to its very fast drying, it is passable in a short period of application.

Applications

Specifically formulated for use on concrete or asphalt pavements.

Surface treatment

Surfaces, in general, must be dry, firm, clean and free from grease, dust and rust.     

• New surface: New pavements must not be painted before 28 days, in order that the concrete is completely set. Once completely set and dry it must be thoroughly cleaned prior to painting, and in case the floor is not porous, it should be pre-brushed with metal prongs. Do not paint if soil is moist.
• Old surface: If the pavement is old and is stained by use, the stains must be removed in the proper way. It will continue as a new surface. The asphalt must be completely dry.

For reflective signage, incorporate reflecting spheres into the paint.

Presentation    

• Colors: White and Yellow.
• Appearance: Semi-matt.

Yield: 2-5 m² / L (Approximate per coat).

Drying:

• At touch: 20-30 minutes (at 40 microns, 23 ° C and 55% relative humidity).
• Total: 1 - 2 hours (at 40 microns, 23 ° C and 55% relative humidity).

Repainting: From 2 hours depending on the thickness.Transitable 2-4 hours after painting (depending on thickness).

Number of layers: 2 layers.

Recommended thickness: 40-50 microns per coat.

Tools:

• Brush, roller, gun or signaling machine Conventional
• Gun: Nozzle 1.82.4 mm (3-4 bar)
• Airless spray gun: 0.43-0.48 mm (110160 bar)

Dilution: 10% Synthetic Solvent X (Quick Drying) in spray application

Cleaning: Solvent