Paint for road markings based on solvent-based single component acrylic resins.Road marking paint. Very hard-wearing outdoors and resistant to abrasion. Fast drying
Main Properties
Applications
Specifically formulated for use on concrete or asphalt pavements.
Surface treatment
Surfaces, in general, must be dry, firm, clean and free from grease, dust and rust.
For reflective signage, incorporate reflecting spheres into the paint.
Presentation
Yield: 2-5 m² / L (Approximate per coat).
Drying:
Repainting: From 2 hours depending on the thickness.Transitable 2-4 hours after painting (depending on thickness).
Number of layers: 2 layers.
Recommended thickness: 40-50 microns per coat.
Tools:
Dilution: 10% Synthetic Solvent X (Quick Drying) in spray application
Cleaning: Solvent
Smooth coating paint for exterior use, based on acrylic copolymers in emulsion. Intermixable colours. High resistance to outdoors conditions. It contains anti mould preservative. For protecting and waterproofing. Breathable.
Highly opaque acrylic paint with excellent adhesion, resistance to wet scrubbing, and alkalinity resistance of the substrates. Protection and decoration of sports surfaces: tennis and pelota courts. For both walls and floors.
Antidrop Super, smooth surfaces with acrylic latex paint. Very good covering power and superior polyamide, 11 mm.
Recommended use: Smooth surfaces with acrylic latex paint
Specially formulated solvent for chlorocaucho paints and signaling
Alkyd enamel with a glossy finish and anticorrosive effect. Excellent levelling, brushability and coverage. Suitable for the protection of metal surfaces that require good resistance (doors, windows, railings, fences, wainscoting, pipes, furniture, industrial vehicles, wooden boats and tanks). Good gloss and colour retention.
Acrylic solvent-based multifunction primer with antioxidant properties for difficult-to-bond surfaces. Repaintable with 1 and 2 component products. Adherence to all types of surfaces such as PVC and non-ferrous metals. Interior Exterior
Ready-to-use, maintenance-free half mask designed for effective and comfortable protection against organic vapour and particulate hazards found throughout industry.
Phosphocromatising and passivating vinyl primer with a single component for industrial use.
Especially suitable for the application of both ferrous metal surfaces and different non-ferrous alloys (galvanized, aluminum, zinc-plated ...), which present adhesion problems. As pre-treatment of blasting steel allowing different finishes (alkyd, Polyurethanes, Epoxy.)
Alkyd enamel with a glossy finish and anticorrosive effect. Excellent levelling, brushability and coverage. Suitable for the protection of metal surfaces that require good resistance (doors, windows, railings, fences, wainscoting, pipes, furniture, industrial vehicles, wooden boats and tanks). Good gloss and colour retention.
Converter of oxide of a single layer.It does not allow the advance of I oxidize.It can be repainted with completed solvent type(Alkyd,chlorine rubber, epoxy and polyurethane) it is used on rusty surfaces difficult to carry out a severe cleaning of surface.
Chat with us on WhatsApp
Español
Français
