Alkyd enamel with a matt finish and anti-corrosion effect. Excellent levelling, brushability and coverage. Suitable for the protection of metal surfaces requiring good resistance (doors, windows, railings, fences, wainscoting, pipes, furniture, industrial vehicles, wooden boats and tanks). Good colour retention.
DESCRIPTION
Matte finish alkyd enamel with anti-corrosion effect
PROPERTIES
Classic drying.
Good anti-corrosion power.
Good brushability and levelling.
Very good coverage.
Good colour retention.
Complies with VOC 2010 regulations for the construction sector.
APPLICATIONS
For the protection of metal surfaces that require good corrosion resistance (doors, windows, railings, fences, wainscoting, conduction pipes, industrial vehicles, tank exteriors, etc.)
TECHNICAL DATA
Yield: 14-16m²/l
Appearance: Matt.
Application: Brush, trowels, rollers or spray gun
Number of coats: Two.
Drying:
To the touch: approx. 1 hour 30 minutes (at 40μm, 23º C and 55% relative humidity).
English:Total: 4 hours (at 40μm, 23º C and 55% relative humidity).
Repainting:After 16 hours at 20º C)
Recommended thickness: 35–40μm per coat
Tools:
Aerographic projection equipment, air-mix, brush or roller.
Conventional spray gun: 1.8-2.2 mm nozzle (3-6 bar)
Dilution: Maximum 20% in spray gun with Solvent
Cleaning: Solvent
Surface treatment
Surfaces in general must be dry, firm, clean and free of grease, dust and rust. Remove elements that present poor adhesion.
Apply on surfaces previously prepared with Antioxidant Synthetic Primer.
Synthetic enamel. Based on high solids technology. Specially for lacquering and enamelling. Easy application, producing premium quality, fine, soft-feel satin finishes with an excellent lacquered look.. Great resistance to wearing, scratching, soaps, liqueur, juice and oil stains. Highly wash-resistant.
For indoor and outdoor use. For protecting and decorating all kinds of wood and metal.
Quick-drying synthetic primer for iron. Price quality. Indoors and outdoors. Good anti-corrosion power. Very suitable for machinery, structures, grilles, fences, etc.
Synthetic enamel. Based on high solids technology. Quick-drying. Multi-Purpose. Hard-wearing. Highly wash resistant. Fine velvety matt finish. Easy application. Very suitable for application by brush. For indoor use. To protect and embellish doors, furniture, vehicles, machinery, etc.
It is a synthetic, quick-drying enamel based on modified alkyd resins. Modified quick-drying synthetic enamel which contains a rust-preventive additive. To be directly applied on iron or steel. Excellent resistance to outdoor conditions.
High glossy water-based high adhesion antioxidant enamel. Very easy application on any kind of surface. Great flexibility and elastic. Suitable for any kind and shape of materials. Once applied, it makes a film which protects the coated items from moist and external agents. Good obliteration. Good resistance to mar and washes. It adheres to wood
Satin finish high adhesion enamel. Water-soluble. Elastic. Very easy application on any kind of surface. Suitable for any kind and shape of materials. Once applied, it makes a protective and moist self-controlling film. Good obliteration and wearing resistance. It contains anti-mould preservative
Masking Tape, general protection. Individual barcode and solvent-based adhesive.
Recommended use: To protect frames, corner painting…
Minis Foam Pore 3, special textured efects, To create textures on walls and 100% Polyester-based polyurethane foam.
Antioxidant enamel with smooth satin finish applied directly on iron and oxide. With anticorrosive zinc pigments, offering excellent protection against oxidation, adhesion and weather resistance.
It is the ideal treatment for the comprehensive protection of wood. Water repellent. High resistance to outdoor conditions and to the destructive action of sun radiation. Which allow to see the natural appearance of wood it does not form any film on the surface, allowing the passage of water vapour between the inside and outside of the wood and avoiding that the surface cracks or flakes.
Water-based fixative sealer, with high penetrating performance. For indoor and outdoor use. To prime surfaces before painting them. Dilute 1 part fixative with 3-4 water.
Especially suitable for:
Unsound or highly porous walls and ceilings made out of plaster, concrete or brick.
To seal or reinforce old paints before recoating.
It provides protection against mould growth.It contains special resins that protect wood from the suns harmful UV rays, rain and humidity. Repellent, prevents wood swelling and movement. It penetrates deep into wood without building a barrier. It allows wood to breathe.
Alkyd enamel with a matt finish and anti-corrosion effect. Excellent levelling, brushability and coverage. Suitable for the protection of metal surfaces requiring good resistance (doors, windows, railings, fences, wainscoting, pipes, furniture, industrial vehicles, wooden boats and tanks). Good colour retention.
Transparent varnish available with acrylic or synthetic resins to the solvent, in finish, gloss. Excellent hardening and elasticity. It does not yellow.
Alkyd enamel with a glossy finish and anticorrosive effect. Excellent levelling, brushability and coverage. Suitable for the protection of metal surfaces that require good resistance (doors, windows, railings, fences, wainscoting, pipes, furniture, industrial vehicles, wooden boats and tanks). Good gloss and colour retention.
Alkyd enamel with a matt finish and anti-corrosion effect. Excellent levelling, brushability and coverage. Suitable for the protection of metal surfaces requiring good resistance (doors, windows, railings, fences, wainscoting, pipes, furniture, industrial vehicles, wooden boats and tanks). Good colour retention.
Alkyd enamel with a matt finish and anti-corrosion effect. Excellent levelling, brushability and coverage. Suitable for the protection of metal surfaces requiring good resistance (doors, windows, railings, fences, wainscoting, pipes, furniture, industrial vehicles, wooden boats and tanks). Good colour retention.
Special for terracotta clay tile, aged marble, travertine, slate, stone, hydraulic mosaic and brick face view. Easy to apply and without complications of background and finish. Dry 2 to 4 hours. Product ready for use. Application to brush or Fine foam roller
Chat with us on WhatsApp
Español
Français
