Español
Français
- On sale!
- -40%
White satin synthetic glaze with fast drying and high color stability and high temperature resistance
HEAT RESISTANT PAINT BLACK high temperatures up to 350ºC ALP
€108.54
€65.12
Save 40%
Tax included
It is a coating based on a modified silicone resin and with pigments of a high thermal resistance. It stands high temperatures without losing its original appearance and protection performance. As a protection of iron and steel elements submitted to high temperatures. Suitable for boilers, chimneys and in general for all those elements that are continuously exposed to high temperatures up to 350ºC
Description
Black satin enamel resistant to high temperatures (up to 350 ºC).
Main Properties
- Easy application, good brochabilidad and leveling.
- Excellent hardness and flexibility.
- Single layer.
- Protects against high temperatures in all types of ferrous materials
- Resists 350ºC
Recommended Uses
Indoors and outdoors on ferrous metals, steel plates, pipes, wrought iron, fireplaces, etc.
Surface treatment
Surfaces should always be healthy, clean, dry, free of grease, dust, rust and other contaminants.
- New surfaces: They must be prepared with the appropriate primer to the type of support used.
- Painted surfaces in poor condition: In addition to the above considerations, the surface must be free of poorly adhered paint. Sanitize defective areas and proceed as on a new surface.
Yield: 14-16 m² / Lts
Interior Exterior
Quick Drying: 1H
Repainting: If necessary, recoat before 8 hours or after 7 days.
Number of layers: One, at a thickness of 25 - 30 microns dry.
Tools: Brush / Roller / Pistol.
Dilution:
- For brush or roller: Product ready to use. Dilute to a maximum of 5% with Solvent
- For spray gun dilute up to a maximum of 15% with Solvent until adequate viscosity.
Cleaning: Clean utensils with Solvent
You might also like
Mixture of a wide range of solvents. Quick evaporation and high thinning power.
For dilution of phosphochromatising paints. Especially indicated for our Shop Primer of the LCP line, as well as for phospho-chromatizing paints.
Semitriple Thickness Flat PRO Brush - Serie 4, ideal for all kind of applications. Plastic handle and cooper ferrule.
- Plastic handle and.
- Copper ferrule.
- Resistant to most common solvents.
- Mixture of bristles and synthetic filaments.
Recommended use: Ideal for all kind of applications
Phosphocromatising and passivating vinyl primer with a single component for industrial use.
Especially suitable for the application of both ferrous metal surfaces and different non-ferrous alloys (galvanized, aluminum, zinc-plated ...), which present adhesion problems. As pre-treatment of blasting steel allowing different finishes (alkyd, Polyurethanes, Epoxy.)
16 other products in the same category:
Anti-oxidant enamel with a smooth glossy finish that is applied directly on iron and oxide. With anticorrosive pigments of zinc, offering excellent protection against oxidation, adhesion and resistance to the elements.
Synthetic enamel to apply on non-ferrous metals (galvanized, zinc, aluminum, copper) without previous primer. Exceptional direct adhesion. Excellent weather resistance.
White satin synthetic glaze with fast drying and high color stability and high temperature resistance
It is a synthetic, quick-drying enamel based on modified alkyd resins. Modified quick-drying synthetic enamel which contains a rust-preventive additive. To be directly applied on iron or steel. Excellent resistance to outdoor conditions.
Quick drying rustproof enamel-paint. Direct application on steel, no primer is needed. It provides up 10 years weathering resistance and a high gloss finish. High adhesion. Hardwearing. Resistant to impact and scratches.
The use of Smooth OXIRON allows saving time because overcoating is possible after one hour and, in this way, most paint works can be finished in one single day.
Chat with us on WhatsApp
