• On sale!
  • -30%

ENAMEL FOR RADIATORS White Satin Resistant HIGH TEMPERATURES

€37.33
€26.13 Save 30%
Tax included

White satin synthetic glaze with fast drying and high color stability and high temperature resistance

size : 750ml
Color : White
Quantity
Add to wishlist

Description
White satin synthetic glaze with fast drying and high color stability.

Main Properties

  • Easy application, good brochabilidad and leveling.
  • Excellent resistance to temperature.
  • Excellent hardness and flexibility.

Recommended Uses

Inside all types of radiators both cast iron and aluminum and their facilities, whether these are copper or iron.

Withstands temperatures until:
Recommended up to 90º C. Unsuitable for temperatures above 150º C.

Surface treatment
Surfaces should always be healthy, clean, dry, free of grease, dust, rust and other contaminants.

  • New surfaces: They must be prepared with the appropriate primer to the type of support used.
  • Painted surfaces in poor condition: In addition to the above considerations, the surface must be free of poorly adhered paint. Sanitize defective areas and proceed as on a new surface.

Resistance to heat: Recommended up to 90ºC. Inadequate for temperatures above 150ºC.

IMPORTANT: At least 72 hours are required before putting the painted element into operation.

Yield: 14-16 m² / l
Interior Exterior
Drying: 6 hours
Repainting: 24 hours
Number of layers: Two or more layers depending on the porosity.
Tools: Brush / Roller / Pistol.
Dilution:

  • For brush or roller: Product ready to use. Dilute to a maximum of 5% with Solvent
  • For spray gun dilute up to a maximum of 15% with Solvent until adequate viscosity.

Cleaning: Clean utensils with Solvent

New

You might also like

Synthetic enamel. Based on high solids technology. Specially for lacquering and enamelling. Easy application, producing premium quality, fine, soft-feel satin finishes with an excellent lacquered look.. Great resistance to wearing, scratching, soaps, liqueur, juice and oil stains. Highly wash-resistant.

For indoor and outdoor use. For protecting and decorating all kinds of wood and metal.

HEAT RESISTANT PAINT BLACK high temperatures up to 350ºC ALP
  • On sale!
  • -25%

It is a coating based on a modified silicone resin and with pigments of a high thermal resistance. It stands high temperatures without losing its original appearance and protection performance. As a protection of iron and steel elements submitted to high temperatures. Suitable for boilers, chimneys and in general for all those elements that are continuously exposed to high temperatures up to 350ºC

Flat Sanding Block for wood and bodywork. Very flexible foam inside and adaptable to the surface.

  • Very flexible foam inside.
  • Can be used wet or dry.
  • Adaptable to the surface.
  • Medium density foam covered with silicon carbide

Recommended use: For wood and bodywork

Minis Antidrop Super, Small flat surface with water-based paints. Rounded end allowing corner painting and avoiding marks. Manufactured by thermofusion to avoid sewing points.

  • Maximum covering power.
  • Rounded end allowing corner painting and avoiding marks.
  • Manufactured by thermofusion to avoid sewing points.

16 other products in the same category:

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.