Waterproof protective cover for wood, to be used against bleaching fungi or bluish. Basidiomycete fungi, termites and woodworms. Penetrates easily into wood. It is a moisture regulator and provides a preparation for subsequent treatment with varnishes and finishing protectors.
For new and old non-tropical woods, it prevents the appearance of woodworm, termite and fungi. Without smell

Natural oil-based product which soaks and protects teak wood. It contains UV filters. Very low odour. For protection and restoration of teak under outdoor conditions.

Open pore protector, formulated based on a trihybrid solution with acrylic, alkyd and polyurethane resins, which provides hardness, elasticity, abrasion resistance and provides a homogeneous wear. Impregnating, microporous, water-repellent. With excellent resistance to the action of the sun thanks to the ultraviolet filters of triple spectrum

Polyurethane special effect lacquer. Based on high solids technology. Easy to apply. High covering. Smooth, hard, tough and silky finish. Colour, graining and look of natural wood. Wash resistant. Intermixable weathering-resistant colours.

Oil colours of exceptional colour vividness. Optimum pigment concentration. Good light fastness. Absolute stability

Special for application on linen, cotton or other kinds of canvas, suitably primed. It can also be applied on other surfaces such as wood, tablex, cardboard, etc. provided they are waterproofed with a suitable primer and they have good adhesion.

Quick drying rustproof enamel-paint. Direct application on steel, no primer is needed. It provides up 10 years weathering resistance and a high gloss finish. High adhesion. Hardwearing. Resistant to impact and scratches.

The use of Smooth OXIRON allows saving time because overcoating is possible after one hour and, in this way, most paint works can be finished in one single day.

Water-based acrylic filler (acrylic polymers). To be used indoors and outdoors. Its high flexibility absorbs alterations in the wood shape and size up to 20% caused by temperature changes. Because of its high glassfibre content, it has very good mechanical properties. High adhesion. It avoids breakage produced by structural changes