• On sale!
  • -35%

ANTIGRAFFITI IMLAR CPC Protección based teflon REVETON

€644.83
€419.14 Save 35%
Tax included

Protection treatment of concrete based on Teflon. Elastic, anticarbonation, antigrafitti. Protects against acid rain. Waterproof and anti-fungus. Protection against graffiti. High elasticity for microcracks. Delay carbonation of concrete

size : 5L.
Quantity
Add to wishlist

Description

IMLAR CPC is a 100% pure acrylic emulsion, waterproof and elastic, of Teflon for preventive and curative treatments of facades.

Applications

  • On mineral supports such as brick, fiber cement, stone, reinforced concrete, etc ... to protect it from the action of CO2, sulfur dioxides and acids.
  • As an antipainted treatment that can be easily removed with solvent along with the treatment, in this case a minimum consumption of 150 to 200 g / m² is required.
  • Protection of construction materials against the presence of microcracks, up to 0.3 mm opening between lips.

Properties

  • Protects against acid rain
  • Delay carbonation of concrete
  • Waterproof and anti-fungal
  • Protection against graffiti
  • High elasticity for microcracks
  • Totally colorless


How to use:

    
Support Preparation :.

Surfaces must be strong and dry and free of grease, oil, dirt, oil, fungi, seaweed or debris from poorly bonded material.

    
New concrete or mortar: It must have an age of 21 days and a surface tensile strength greater than 10 kg / cm², with a slightly rough surface finish which is achieved if a fine fracturing is performed at the beginning of the setting.

    
Old Concrete: Old cement surfaces, and especially if they are smooth, must be mechanically and chemically treated to open the pore and ensure the anchoring of the paint.

    
: Stone and patchesThe joints in bad condition should be emptied and repasadas with a suitable mortar.

    
Brick face: Mortar joints, sores and tendons, should be flush with the face of the brick, that is, can not be undone. The application must be done with great care since we have a support with two different absorptions: that of the brick and the mortar.

      
2. Product Application:

Once opened the container must be removed.

On the support previously dampened, or adding some water to the paint, IMLAR CPC is applied in two cross layers.

To obtain an anti-graffiti effect, a minimum of 150-200 g / m² of pure IMLAR CPC must be applied.

Excess product or a layer too thick at one time, can give a whitish appearance to the support.

Tools: Roller, Brush or PistolFor small rough surfaces apply with a brush. For large rough surfaces apply to spray gun, if this is not possible to apply with roller and remove excess brush.

Dry to the Touch: 1-2 hours according to temperature and HR

Appearance: Mate

Performance:

    
Concrete: 5m² / l
    
Natural Stone: 10m² / l

New

You might also like

Nature 70 Padded, façades and outdor surfaces. Maximum covering power and 70 mm. diameter for maximum performance and minimum splash.

  • Maximum covering power.
  • 70 mm. diameter for maximum performance and minimum splash.
  • Manufactured with internal polyurethane foam for better adaptation to irregular surfaces.
  • 100% Extra long Polyamide 20 mm.

Recommended use: Façades and outdor surfaces

Bicolor 60 Padded, façades and outdor surfaces. Maximum covering power and 60 mm. diameter for maximum performance.

  • Maximum covering power.
  • 60 mm. diameter for maximum performance.
  • Manufactured with internal polyurethane foam for berrer adaptation to irregular surfaces.
  • 100% Extra long Polyamide 20 mm.

Recommended use: Façades and outdoor surfaces

16 other products in the same category:

Universal tinting colours for paints. High concentration and compatibility. To tint synthetic and greasy paints and varnishes, as well as coatings made out of chlorinated rubber... It is also suitable for water-emulsion, size and distemper paints. Moreover, it can tint non-structural concrete.

Luxury silk acrylic enamel water walls, very high quality with a great semi-matte finish and very pleasant touch, without neglecting its high level of washability and with very good resistance to stains that make it easy to clean, it offers a great performance and features such as low odor, scratch resistance, an unalterable white, does not splash or leave roller marks.

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.