Main Properties
- Good adhesion on the usual construction materials.
- Easy application
- It does not yellow
- Good breathability
- Does not splash
- Without smell
Recommended uses
Interior on all types of construction materials such as plaster, cement, plaster, concrete or brick.
Surface treatment
The surfaces must always be healthy, clean, dry, free of grease, dust and other contaminants.
- New surfaces: If necessary, prime with Tollens Water Fixing Primer or with the most suitable product from the TOLLENS PRIMER line to improve adhesion and / or equalize absorptions from the substrate.
- Surfaces already painted: In addition to the above considerations, the surface must be free of poorly adhering paint. Sanitize defective areas, fill and level by the most appropriate product of the line of PUTTY
- Surfaces with moisture stains, grease, smoke: Apply a coat of FIX TAC or two coats of ZEUS to the water.
Drying: 1 - 2 hours
Repainting: Starting at 12 o'clock
Theoretical yield: 8-12 m² / L / hand, depending on the absorption and texture of the support
Number of layers: Two or more layers depending on the porosity and color of the support
Tools: Brush / Roller / Airless Gun
You may also need:
- Bodybuilder tape: to cover the cuts
- Covering plastics
- Putty for interior: (To use or powder)
- Sand: In block or pad (After mashing it is necessary to pass a sandpaper to smooth the wall in case we have smooth)
Dilution:
- For brush or roller: First coat dilute up to 15% with water. Second hand up to a maximum of 10%.
- For gun dilute to proper viscosity
Cleaning: Clean utensils with water immediately after use